宝丽来 I-2 底盖更换

crwdns2931529:0crwdnd2931529:0crwdnd2931529:0crwdnd2931529:015crwdnd2931529:0crwdne2931529:0

crwdns2935425:09crwdne2935425:0

crwdns2936315:0crwdne2936315:0

crwdns2936311:0crwdne2936311:0

crwdns2931653:09crwdne2931653:0

Remove the bottom cover

At this point, the bottom cover clips should be released. If not, slide an opening pick along the perimeter of the back cover to release any remaining clips.
Tilt the back of the bottom cover upward and pull it away from the camera, making sure to thread the film door lever from its recess.
Remove the back cover.
During reassembly, insert the film door lever into its recess before aligning the bottom cover and pressing it into place to secure its clips.

移除底盖

此时，底盖卡扣应已松开。如果没有，则沿后盖周边滑动撬片，松开剩余的卡扣。
向上倾斜底盖背面并将其拉离相机，确保将 胶卷门控制杆 从凹槽中穿出。
取下后盖。
重新装配时，先将胶片门控制杆插入凹槽，然后对准底盖并将其按入到位以固定其卡扣。

	[title] Remove the bottom cover
-	[* ~~black~~] At this point, the bottom cover clips should be released. If not, slide an opening pick along the perimeter of the back cover to release any remaining clips.
+	[* icon_note] At this point, the bottom cover clips should be released. If not, slide an opening pick along the perimeter of the back cover to release any remaining clips.
	[* black] Tilt the back of the bottom cover upward and pull it away from the camera, making sure to thread the [link\|https://guide-images.cdn.ifixit.com/igi/luEPUqFKF2sAO2Iq.full\|film door lever\|new_window=true] from its recess.
	[* black] Remove the back cover.
	[* icon_reminder] During reassembly, insert the film door lever into its recess before aligning the bottom cover and pressing it into place to secure its clips.

crwdns2944171:0crwdnd2944171:0crwdnd2944171:0crwdnd2944171:0crwdne2944171:0