iMac Intel 27" EMC 2309 and 2374 Display Replacement

crwdns2936071:01crwdne2936071:0

Remove the eight T10 Torx screws securing the LCD to the outer case.

crwdns2936071:02crwdne2936071:0

Carefully lay the iMac stand-side down on a flat surface.

crwdns2936071:03crwdne2936071:0

Use a pair of tweezers to pull the vertical sync ribbon cable out of its socket on the LED driver board near the top left corner of your iMac.

crwdns2936071:04crwdne2936071:0

Rotate the display out of the outer case enough to disconnect the LED backlight power cable from the LED driver board.

crwdns2936071:05crwdne2936071:0

Squeeze the two display data cable connector arms together to unlock it from its socket on the logic board.

crwdns2936071:06crwdne2936071:0

Lift the display for enough clearance to disconnect the LCD thermal sensor cable connector from its socket on the logic board.

crwdns2936071:07crwdne2936071:0

Carefully pull the display toward the top edge of your iMac and lift it out of the outer case.