crwdns2933423:0crwdne2933423:0

iMac Intel 27インチEMC 2309と2374のディスプレイの交換

crwdns2931529:0crwdnd2931529:0crwdnd2931529:0crwdnd2931529:016crwdnd2931529:0crwdne2931529:0

crwdns2936315:0crwdne2936315:0
crwdns2936323:0crwdne2936323:0
crwdns2931653:02crwdne2931653:0
iMac Intel 27" EMC 2309 and 2374 Display Replacement: crwdns2935265:00crwdnd2935265:01crwdnd2935265:03crwdne2935265:0 iMac Intel 27" EMC 2309 and 2374 Display Replacement: crwdns2935265:00crwdnd2935265:02crwdnd2935265:03crwdne2935265:0 iMac Intel 27" EMC 2309 and 2374 Display Replacement: crwdns2935265:00crwdnd2935265:03crwdnd2935265:03crwdne2935265:0
  • Carefully lay the iMac stand-side down on a flat surface.

  • Due to tight tolerances, you will have to use a thin hooked tool to lift the display out of the outer case. As seen in the third picture, we made one out of a bent paperclip.

  • Use a thin hooked tool to lift one side of the top edge of the display by its steel outer frame.

  • After lifting the top edge of the display on one side, hold it out of the outer case while you use a hooked tool to lift the other side. A pencil or pen can be placed under the top edge of the display, parallel to the top edge and extending past the edge of the computer, to keep the first side propped up while lifting the second.

  • Do not lift the top edge of the display out of the outer case too far, as several short ribbon cables still connect the two components.

iMac のスタンド側を奥に向け、手前側に上部を向け、iMacを倒して平らな場所へ慎重に置きます。

外側のケースからディスプレイを持ち上げるには、あまり隙間がないため、細いフック付きのツールを使用するのが良いでしょう。私達は3枚目の画像で見られるように、曲がったクリップを作成し、液晶パネルを取り外す作業に使用しました。

曲がったクリップを使用して、ディスプレイの上端の片側をスチール製の外枠からそっと持ち上げます。

片側のディスプレイの上端を持ち上げたら、鉛筆またはペンを使用して、持ち上げたディスプレイに立てかけて支えるようにします。そして、引っ掛けた道具を使ってもう片側を持ち上げます。

ディスプレイを持ち上げるときは注意が必要です。ディスプレイと本体のマザーボードの2つのコンポーネントを接続する短いリボンケーブルがつながっており、ディスプレイはあまり持ち上げすぎないようにする必要があります。ディスプレイと本体を接続しているケーブルを確認しながら作業をしてください。

crwdns2944171:0crwdnd2944171:0crwdnd2944171:0crwdnd2944171:0crwdne2944171:0