Whirlpool 건조기 고한계 온도 조절 장치 / 인렛 서미스터 테스트 및 교체

crwdns2933809:0crwdne2933809:0

crwdns2935433:0crwdne2935433:0

Whirlpool WED87HED 안전 전제 조건

Whirlpool 건조기 상단 패널 분리하기 선행 작업

Whirlpool 건조기 제어판 교체 선행 작업

Whirlpool 건조기의 전면 패널을 분리하는 방법

Whirlpool 건조기 전원 코드 교체

Whirlpool 건조기의 후면 패널을 분리하는 방법

Whirlpool 건조기의 보풀 필터 하우징 분리하기 선행 작업 전제 조건

Whirlpool 건조기의 습도 센서 연결 해제하는 방법 선행 작업

Whirlpool 건조기의 전면 벌크헤드를 분리하는 방법

Whirlpool 건조기의 드럼을 분리하기 위한 선행 작업

crwdns2935443:0crwdne2935443:0

= crwdns2915112:0crwdne2915112:0 = crwdns2861241:0crwdne2861241:0

crwdns2936315:0crwdne2936315:0

crwdns2936325:0crwdne2936325:0

crwdns2936129:0crwdne2936129:0

crwdns2947189:0crwdne2947189:0

crwdns2915892:0crwdne2915892:0

Use this guide to test the hi-limit thermostat/inlet thermistor on your Whirlpool Dryer and replace it if necessary. These components are combined into one unit, so if either component fails, you will need to replace the whole unit.

These components control your dryer's temperature. The inlet thermistor lets the main board know what the inlet temperature is, and the hi-limit thermostat shuts off the heater if it overheats. The hi-limit will reset and allow the heating element to operate again after a cooling period.

When the hi-limit fails, the dryer may not heat at all, or sometimes it will overheat until the thermal cutoff or thermal fuse operates. When the inlet thermistor fails, your machine will display an error code.

This guide is rated as difficult, mainly because of the amount of disassembly required. None of the steps are particularly difficult in themselves, except perhaps removing the front lower bulkhead.

***This guide will work for most electric Whirlpool dryers.*** This guide is written with a model WED87HED dryer. If you have a different model, you may encounter some minor disassembly differences, but the overall repair process will be the same.

crwdns2915888:0crwdne2915888:0