crwdns2936637:0crwdne2936637:0 crwdns2853008:0crwdne2853008:0 crwdns2918746:0crwdne2918746:0

Google Pixel 7a 스크린 교체하기

crwdns2935419:0crwdne2935419:0
crwdns2936315:0crwdne2936315:0
crwdns2936325:0crwdne2936325:0
crwdns2931653:03crwdne2931653:0
Google Pixel 7a Screen Replacement, Insert an opening pick: crwdns2935265:00crwdnd2935265:01crwdnd2935265:03crwdne2935265:0 Google Pixel 7a Screen Replacement, Insert an opening pick: crwdns2935265:00crwdnd2935265:02crwdnd2935265:03crwdne2935265:0 Google Pixel 7a Screen Replacement, Insert an opening pick: crwdns2935265:00crwdnd2935265:03crwdnd2935265:03crwdne2935265:0
Insert an opening pick

  • Inserting an opening pick is very difficult. Be patient and reheat the screen at any point if it feels stuck.

  • Apply a suction handle to the center of the top edge of the screen.

  • If you can't apply a suction handle to a broken or uneven screen, try folding a strong piece of tape into a handle.

  • Don't insert your pick deeper than 2 mm, as you risk damaging the front-facing camera.

  • Pull up on the suction handle with a strong, steady force.

  • Insert the tip of an opening pick into the left side of the earpiece speaker cutout.

  • Firmly press the pick into the cutout and lower it flat to the screen until it slides under the glass.

  • If your pick is too thick to slide under the glass, try a thinner object like the flat edge of a Jimmy.

여는 픽 끼우기

여는 픽을 끼우는 것은 매우 어렵습니다. 스크린이 달라붙은 느낌이 들면 인내심을 갖고 언제든지 다시 가열하세요.

스크린 상단 가장자리 중앙에 흡입 핸들을 대세요.

깨지거나 고르지 않은 스크린에 흡입 핸들을 부착할 수 없는 경우에는 강력한 테이프를 손잡이로 접어서 사용해 보세요.

강하고 일정한 힘으로 흡입 손잡이를 위로 당기세요.

여는 픽의 끝을 이어피스 스피커 컷아웃의 왼쪽에 끼우세요.

픽을 컷아웃에 단단히 누르고 유리 밑으로 밀 수 있을 때까지 스크린에 수평으로 내리세요.

픽이 너무 두꺼워서 유리 밑으로 밀 수 없는 경우 Jimmy/지미의 평평한 가장자리와 같이 더 얇은 도구를 사용하세요.

[title] Insert an opening pick
[* icon_caution] Inserting an opening pick is very difficult. Be patient and reheat the screen at any point if it feels stuck.
[* black] Apply a suction handle to the center of the top edge of the screen.
[* icon_note] If you can't apply a suction handle to a broken or uneven screen, try [link|https://guide-images.cdn.ifixit.com/igi/ASxjs3yA1It1qQHm.huge|folding a strong piece of tape|new_window=true] into a handle.
+[* icon_caution] Don't insert your pick deeper than 2 mm, as you risk damaging the front-facing camera.
[* black] Pull up on the suction handle with a strong, steady force.
[* black] Insert the tip of an opening pick into the [link|https://guide-images.cdn.ifixit.com/igi/jTap6qAWb3RoxKkd.huge|left side of the earpiece speaker cutout|new_window=true].
[* black] Firmly press the pick into the cutout and lower it flat to the screen until it slides under the glass.
[* icon_note] If your pick is too thick to slide under the glass, try a thinner object like the flat edge of a [product|IF145-259|Jimmy|new_window=true].

crwdns2944171:0crwdnd2944171:0crwdnd2944171:0crwdnd2944171:0crwdne2944171:0