crwdns2933423:0crwdne2933423:0

Sostituzione gruppo di ricarica wireless Google Pixel 7a

crwdns2931529:0crwdnd2931529:0crwdnd2931529:0crwdnd2931529:013crwdnd2931529:0crwdne2931529:0

crwdns2936315:0crwdne2936315:0
crwdns2936321:0crwdne2936321:0
crwdns2931653:05crwdne2931653:0
Google Pixel 7a Wireless Charging Assembly Replacement, Unfasten the logic board cover: crwdns2935265:00crwdnd2935265:01crwdnd2935265:02crwdne2935265:0 Google Pixel 7a Wireless Charging Assembly Replacement, Unfasten the logic board cover: crwdns2935265:00crwdnd2935265:02crwdnd2935265:02crwdne2935265:0
Unfasten the logic board cover
  • While the Pixel 7a uses Torx Plus screws, standard Torx drivers may still work. If your kit came with standard Torx bits, use the T2 bit to remove 1IP Torx Plus screws, and the T3 Torx bit to remove 3IP Torx Plus screws. Make sure to apply constant, downward force to prevent stripping.

  • Use a 3IP Torx Plus driver to remove the thirteen 4.3 mm screws securing the logic board cover.

  • Use a 1IP Torx Plus driver to remove the 1.5 mm screw securing the right edge of the cover.

Anche se il Pixel 7a usa viti Torx Plus, le punte delle Torx standard vanno bene. Assicurati di applicare una forza costante e verso il basso per evitare che si spani.

Usa un cacciavite T3 Torx per rimuovere le tredici viti 3IP Torx Plus di 4,3 mm che fissano il bordo destro della copertura.

Usa un cacciavite T2 Torx per rimuovere la vite 1IP Torx Plus di 1,5 mm che fissa il bordo destro della copertura.

[title] Unfasten the logic board cover
-[* icon_note] While the Pixel 7a uses [link|https://en.m.wikipedia.org/wiki/Torx#Torx_Plus|Torx Plus|new_window=true] screws, standard Torx bits work. Make sure to apply constant, downward force to prevent stripping.
-[* red] Use a T3 Torx driver to remove the thirteen 4.3 mm 3IP Torx Plus screws securing the logic board cover.
-[* orange] Use a T2 Torx driver to remove the 1.5 mm 1IP Torx Plus screw securing the right edge of the cover.
+[* icon_note] While the Pixel 7a uses [link|https://en.m.wikipedia.org/wiki/Torx#Torx_Plus|Torx Plus|new_window=true] screws, standard Torx drivers ''may'' still work. If your kit came with standard Torx bits, use the T2 bit to remove [product|IF145-373-88|1IP Torx Plus|new_window=true] screws, and the T3 Torx bit to remove 3IP Torx Plus screws. ***Make sure to apply constant, downward force to prevent stripping.***
+[* red] Use a 3IP Torx Plus driver to remove the thirteen 4.3 mm screws securing the logic board cover.
+[* orange] Use a 1IP Torx Plus driver to remove the 1.5 mm screw securing the right edge of the cover.

crwdns2944171:0crwdnd2944171:0crwdnd2944171:0crwdnd2944171:0crwdne2944171:0