crwdns2936637:0crwdne2936637:0 crwdns2853008:0crwdne2853008:0 crwdns2918746:0crwdne2918746:0

Reemplazo del conjunto de carga inalámbrica de Google Pixel 7a

crwdns2931529:0crwdnd2931529:0crwdnd2931529:0crwdnd2931529:013crwdnd2931529:0crwdne2931529:0

crwdns2935419:0crwdne2935419:0
crwdns2936315:0crwdne2936315:0
crwdns2936331:0crwdne2936331:0
crwdns2931653:05crwdne2931653:0
Google Pixel 7a Wireless Charging Assembly Replacement, Unfasten the logic board cover: crwdns2935265:00crwdnd2935265:01crwdnd2935265:02crwdne2935265:0 Google Pixel 7a Wireless Charging Assembly Replacement, Unfasten the logic board cover: crwdns2935265:00crwdnd2935265:02crwdnd2935265:02crwdne2935265:0
Unfasten the logic board cover

  • While the Pixel 7a uses Torx Plus screws, standard Torx drivers may still work. If your kit came with standard Torx bits, use the T2 bit to remove 1IP Torx Plus screws, and the T3 Torx bit to remove 3IP Torx Plus screws. Make sure to apply constant, downward force to prevent stripping.

  • Use a 3IP Torx Plus driver to remove the thirteen 4.3 mm screws securing the logic board cover.

  • Use a 1IP Torx Plus driver to remove the 1.5 mm screw securing the right edge of the cover.

Desabrocha la cubierta de la placa lógica

Si bien el Pixel 7a usa tornillos Torx Plus, las puntas Torx estándar funcionan. Asegúrate de aplicar una fuerza constante hacia abajo para evitar que se desprenda.

Utiliza un controlador Torx T3 para quitar los trece tornillos 3IP Torx Plus de 4,3 mm que sujetan la cubierta de la placa lógica.

Utiliza un destornillador Torx T2 para quitar el tornillo Torx Plus 1IP de 1,5 mm que fija el borde derecho de la cubierta.

[title] Unfasten the logic board cover
-[* icon_note] While the Pixel 7a uses [link|https://en.m.wikipedia.org/wiki/Torx#Torx_Plus|Torx Plus|new_window=true] screws, standard Torx bits work. Make sure to apply constant, downward force to prevent stripping.
-[* red] Use a T3 Torx driver to remove the thirteen 4.3 mm 3IP Torx Plus screws securing the logic board cover.
-[* orange] Use a T2 Torx driver to remove the 1.5 mm 1IP Torx Plus screw securing the right edge of the cover.
+[* icon_note] While the Pixel 7a uses [link|https://en.m.wikipedia.org/wiki/Torx#Torx_Plus|Torx Plus|new_window=true] screws, standard Torx drivers ''may'' still work. If your kit came with standard Torx bits, use the T2 bit to remove [product|IF145-373-88|1IP Torx Plus|new_window=true] screws, and the T3 Torx bit to remove 3IP Torx Plus screws. ***Make sure to apply constant, downward force to prevent stripping.***
+[* red] Use a 3IP Torx Plus driver to remove the thirteen 4.3 mm screws securing the logic board cover.
+[* orange] Use a 1IP Torx Plus driver to remove the 1.5 mm screw securing the right edge of the cover.

crwdns2944171:0crwdnd2944171:0crwdnd2944171:0crwdnd2944171:0crwdne2944171:0