crwdns2933423:0crwdne2933423:0

iMac Intel 27インチ EMC 2546接着剤ストリップの交換

crwdns2931527:0crwdnd2931527:0crwdnd2931527:0crwdnd2931527:0crwdne2931527:0

crwdns2936315:0crwdne2936315:0
crwdns2936323:0crwdne2936323:0
crwdns2931653:02crwdne2931653:0
iMac Intel 27" EMC 2546 Adhesive Strips Replacement: crwdns2935265:00crwdnd2935265:01crwdnd2935265:02crwdne2935265:0 iMac Intel 27" EMC 2546 Adhesive Strips Replacement: crwdns2935265:00crwdnd2935265:02crwdnd2935265:02crwdne2935265:0
  • Before you start placing strips, remove all of the old adhesive from around the perimeter of the rear enclosure.

  • If you are re-using your existing display, you must also remove the old adhesive from the back of the display.

  • Peel off the old strips of adhesive using tweezers or your fingers. Start at the bottom and peel upward towards the top of the device.

  • After all the old adhesive is removed, carefully clean the area under the adhesive with 90% (or greater) isopropyl alcohol and a lint-free cloth. Wipe in one direction, not back and forth.

  • Don't skip this step, or your new adhesive strips may not bond properly, and the display may fall out of your iMac.

ストリップの取り付けを開始する前に、後ろ(本体側)の周りに残っている古い接着剤をすべて取り除いてください。

既存のディスプレイを再使用する場合は、古い接着剤もディスプレイの背面から取り外す必要があります。

ピンセットもしくは指先で、古い接着ストリップを剥がします。下側から初めてデバイス上部側に上向きにして剥がします。

古い接着剤が剥がれたら、ゆっくりと接着剤が付けられていたエリアを濃度90%以上のイソプロピルアルコールと糸くずの出ないメガネ拭きなどのクロスを使って綺麗に拭き取ります。前後ではなく、一方向に拭いてください。

この手順をスキップしないでください。新しい接着ストリップが綺麗に装着しないことがあります。そしてiMacからディスプレイが落下する恐れがあります。

[* icon_caution] Before you start placing strips, remove all of the old adhesive from around the perimeter of the rear enclosure.
[* black] If you are re-using your existing display, you must also remove the old adhesive from the back of the display.
- [* black] Peel off the old strips of adhesive using tweezers or your fingers. Start at the bottom and peel ''upward'' towards the top of the device.
+ [* black] Peel off the old strips of adhesive using [product|IF145-020|tweezers] or your fingers. Start at the bottom and peel ''upward'' towards the top of the device.
[* black] After all the old adhesive is removed, carefully clean the area under the adhesive with 90% (or greater) isopropyl alcohol and a lint-free cloth. Wipe in one direction, not back and forth.
[* icon_caution] ***Don't skip this step***, or your new adhesive strips may not bond properly, and the display may fall out of your iMac.

crwdns2944171:0crwdnd2944171:0crwdnd2944171:0crwdnd2944171:0crwdne2944171:0