Replacement thermal fuse on bread machine

crwdns2936071:01crwdne2936071:0 — Removing the lid

Place the cover in an upright position

crwdns2936071:02crwdne2936071:0 — Removal of shutters

Remove the 4 shutters from the control panel with a very thin screwdriver. This can be difficult or even impossible.

crwdns2936071:03crwdne2936071:0 — Removing the control panel

With a PH2 screwdriver remove the 4 screws dia 3 x 13

crwdns2936071:04crwdne2936071:0 — Removal of the thermal crankcase

With a PH2 screwdriver remove the 4 upper screws dia 4.2 x 9.5

crwdns2936071:05crwdne2936071:0 — Removal of the thermal screen

With a PH2 screwdriver remove the 2 screws dia 4.5 x 9.3

crwdns2936071:06crwdne2936071:0 — Removal of the thermal fuse holding flange

The purpose is to deposit the sheet metal flange that holds the two fuses (two large white and red textile sheaths) and the probe (small white sheath)

crwdns2936071:07crwdne2936071:0 — Diagnosis

The absence of a power supply requires a diagnosis. The electrical test can be facilitated by opening the back of the splices with a cutting clamp.

crwdns2936071:08crwdne2936071:0 — Replacement of the fuse

Slide the textile sheath to make the fuse and its set rings appear.