crwdns2933423:0crwdne2933423:0

Samsung Galaxy S22 Plus Vervanging van de USB-C-poort en het oplaadbord

crwdns2935443:0crwdne2935443:0

= crwdns2915112:0crwdne2915112:0 = crwdns2861241:0crwdne2861241:0
crwdns2936315:0crwdne2936315:0
crwdns2936313:0crwdne2936313:0
    Use this guide to replace the USB-C port and charging board in your Samsung Galaxy S22+.
    Before you begin, refer to the [document|28390|Samsung Self-Repair document] for safety information.
    Before disassembling your device, completely discharge the battery. This reduces the risk of a dangerous thermal event if the battery is accidentally damaged during the repair. If your battery is swollen, [[What to do with a swollen battery|take appropriate precautions|new_window=true]].
    Note: Retaining water resistance after the repair will depend on how well you reapply the adhesive, but your device will lose its IP (Ingress Protection) rating.
      ***To reassemble your device, follow the instructions in reverse order*** and perform the opposite actions, e.g., "reattach" instead of "removing." Skip steps that use heating and prying, and pay close attention to the 📌 bullets as you work through the steps.
      After you've completed the repair, download the Samsung Members App from the Galaxy Store or the Play Store, and [document|28390|Samsung Self-Repair document] (beginning page 10) to make sure your device is fully functional.
      ***To reassemble your device, follow these instructions in reverse order.***
      Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
      Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our [link|https://www.ifixit.com/Answers/Device/Samsung%20Galaxy%20S22%20Plus|Answers community] for help.

      crwdns2931349:0crwdne2931349:0

      crwdns2936071:01crwdne2936071:0 — Koppel de batterij los

      Gebruik je spudger om de drukaansluiting van de batterij uit het contact omhoog te duwen en los te koppelen.

      crwdns2936071:02crwdne2936071:0 — Verwijder de interconnectkabels

      Gebruik je spudger om de drukaansluiting van de primaire interconnectkabel uit het contact op het moederbord omhoog te duwen en los te koppelen.

      crwdns2936071:03crwdne2936071:0

      Gebruik je spudger om de drukaansluiting van de primaire interconnectkabel uit het contact op het oplaadbord omhoog te duwen en los te koppelen.

      crwdns2936071:04crwdne2936071:0

      Gebruik een pincet of je vingers om de interconnectkabels te verwijderen.

      crwdns2936071:05crwdne2936071:0 — Verwijder het oplaadbord

      Gebruik een kruiskopschroevendraaier(bitje) om de drie 3.4 mm lange schroeven, waarmee het oplaadbord bevestigd is, te verwijderen.

      crwdns2936071:06crwdne2936071:0

      Steek de punt van je spudger tussen de rechter bovenkant van het oplaadbord en het frame.

      crwdns2936071:07crwdne2936071:0

      Trek het oplaadbord omhoog tot deze in een hoek van 30 graden staat en trek het bord vervolgens uit het toestel.

      crwdns2944171:0crwdnd2944171:0crwdnd2944171:0crwdnd2944171:0crwdne2944171:0