iPhone 12 Teardown

crwdns2936071:01crwdne2936071:0 — Remove the SIM

Remove the SIM Card tray using a SIM Card eject tool

crwdns2936071:02crwdne2936071:0 — Unscrew the lower screws

Turn off the device

crwdns2936071:03crwdne2936071:0 — Raise the display

Apply a heated iOpener all around the edge of the screen to loosen the adhesive under the display.

crwdns2936071:04crwdne2936071:0 — Disconnect the display

Remove the 6 Phillips # 00 screws.

crwdns2936071:05crwdne2936071:0 — Remove the rear camera

Unscrew the 4 Phillips # 00 screws.

crwdns2936071:06crwdne2936071:0 — Remove the front camera.

With a spudger or fingernails to disconnect the three connectors that connect the front camera.

crwdns2936071:07crwdne2936071:0 — Remove the battery holder

With a spudger or fingernails disconnect the battery holder connector.

crwdns2936071:08crwdne2936071:0 — Remove the camera flash

With a spudger or fingernails disconnect the rear camera flash connector.

crwdns2936071:09crwdne2936071:0 — Remove the SIM card holder

Unscrew the 4 Phillips # 00 screws.

crwdns2936071:010crwdne2936071:0 — Remove the battery logic board

Remove the 2 Phillips # 00 screws.

crwdns2936071:011crwdne2936071:0 — Remove the speaker

Unscrew the 5 Phillips # 00 screws.

crwdns2936071:012crwdne2936071:0 — Remove the taptic engine

Remove the 2 screw holders with a standoff screwdriver for iphone

crwdns2936071:013crwdne2936071:0 — Remove the battery

Remove the adhesive under the battery.

crwdns2936071:014crwdne2936071:0 — Remove the charging port

Unscrew 6 Phillips # 00 screws.

crwdns2936071:015crwdne2936071:0

And here are all the components that make up the new iPhone 12.