Huawei MateBook E 2022 SSD Upgrade/Replacement

crwdns2936071:01crwdne2936071:0 — Create an opening gap

Heat up the iOpener for 30 seconds in the microwave. Then, heat up the bottom edge of the display for 90 seconds.

crwdns2936071:02crwdne2936071:0 — Slice through the bottom adhesive

Slice through the adhesive under the screen by sliding the pick along the edge of the display, towards the bottom corners.

crwdns2936071:03crwdne2936071:0 — Remove the display

Lift the display from the right side (with the camera).

crwdns2936071:04crwdne2936071:0 — Remove the frame

Remove the 46 silver PH1-screws.

crwdns2936071:05crwdne2936071:0 — Replace SSD

Remove the PH1-screw, mounting the M.2 SSD.

crwdns2936071:06crwdne2936071:0 — Remove old tape

Remove any residue of the old tape from the four edges of the case.

crwdns2936071:07crwdne2936071:0 — Attach new tape

After mounting the middle frame, attach the new tape to the case.