Repair straightener ghd - Replace thermal fuse ghd

crwdns2936071:01crwdne2936071:0 — remove the round covers

Lightly lift the round covers using your finger to create a small opening.

crwdns2936071:02crwdne2936071:0 — Remove the straightener axle screw

Sometimes these screws are mounted with screw glue. It is best to have two screwdrivers, including a small one for better control.

crwdns2936071:03crwdne2936071:0 — Remove the plastic pin and the spring.

Push the plastic axle with your screwdriver and take it out.

crwdns2936071:04crwdne2936071:0 — Unmount cache from branch and test

Remove the two screws from the button side cover.

crwdns2936071:05crwdne2936071:0 — Removal of the HS fuse

Unscrew the 4 screws that hold the plate to the electronic board.

crwdns2936071:06crwdne2936071:0 — Reassembling the new thermal fuse

Insert the 2 cables of the new thermal fuse.

crwdns2936071:07crwdne2936071:0 — Refit the plate and the cover.

Refit the plate on the electronic card using the 4 screws.

crwdns2936071:08crwdne2936071:0 — Test run

Connect the straightener cable

crwdns2936071:09crwdne2936071:0 — Final assembly

You can now reassemble everything: