Reemplazo del puerto de carga USB-C y placa hija del Samsung Galaxy Tab S7 Plus

crwdns2933809:0crwdne2933809:0

crwdns2935433:0crwdne2935433:0

Extracción de la pantalla

Reemplazo del soporte de marco del Samsung Galaxy Tab S7 Plus

crwdns2935443:0crwdne2935443:0

= crwdns2915112:0crwdne2915112:0 = crwdns2861241:0crwdne2861241:0

crwdns2936315:0crwdne2936315:0

crwdns2936331:0crwdne2936331:0

crwdns2936129:0crwdne2936129:0

crwdns2947189:0crwdne2947189:0

crwdns2915892:0crwdne2915892:0

Use this guide to replace the USB-C port and daughterboard in your Samsung Galaxy Tab S7+ Wi-Fi.

Note: this guide is for the Wi-Fi version. For the 5G version, click [[Topic:Samsung Galaxy Tab S7 Plus 5G|here|new_window=true]].

In order to replace the USB-C port and daughterboard, you must remove the screen. The screen has sensitive components, so there's a risk you'll damage it during the procedure. ***Be sure to apply plenty of heat and be extremely careful during the prying stage.***

***For your safety, fully discharge the battery before disassembling your tablet.*** This reduces the risk of fire if the battery is accidentally damaged during the repair. If your battery is swollen, [[What to do with a swollen battery|take appropriate precautions|new_window=true]].

Note: Retaining water resistance after the repair will depend on how well you reapply the adhesive, but your device will lose its IP (Ingress Protection) rating.

Some photos in this guide are from a different model and may contain slight visual discrepancies, but they won't affect the guide procedure.

crwdns2915888:0crwdne2915888:0

crwdns2936129:0crwdne2936129:0

crwdns2947189:0crwdne2947189:0

crwdns2915892:0crwdne2915892:0

crwdns2915888:0crwdne2915888:0

crwdns2931349:0crwdne2931349:0

crwdns2936071:01crwdne2936071:0 — Desconecta el cable interconector de la placa hija

Usa el extremo plano de un spudger para hacer palanca y desconectar el conector a presión del cable interconector de la placa hija fijado a la placa madre.

crwdns2936071:02crwdne2936071:0 — Afloja la placa hija de carga

Utiliza un destornillador Phillips n.º 00 para quitar los dos tornillos de 2 mm que sujetan la placa hija de carga al marco.

crwdns2936071:03crwdne2936071:0 — Desmonta la placa hija de carga

Introduce un spudger entre la placa hija de carga y el marco.

crwdns2936071:04crwdne2936071:0 — Retira el cable interconector

Usa el extremo plano de un spudger para hacer palanca y desconectar el conector a presión del cable interconector fijado a la placa hija de carga.

crwdns2944171:0crwdnd2944171:0crwdnd2944171:0crwdnd2944171:0crwdne2944171:0