Next step is to separate the two halves of the cylindrical dashcam body. I used an old credit card as well as a spudger tool for this step.

Starting from the right end, work your way carefully along the horizontal crack between the two halves using a spudger and/or credit card. Be patient, don't use too much force or you may break one or more of the internal plastic tabs.

Once you've loosened the tabs holding one side of the body, turn the dashcam over and loosen the other side.

In the 3rd photo, you can see the location of 2 of the internal tabs holding the body together, in the small opening betwen halves. There are 4 of these internal tabs on each side.