crwdns2936637:0crwdne2936637:0 crwdns2853008:0crwdne2853008:0 crwdns2918746:0crwdne2918746:0

Procedura di apertura iPhone 13 mini

crwdns2931529:0crwdnd2931529:0crwdnd2931529:0crwdnd2931529:06crwdnd2931529:0crwdne2931529:0

crwdns2935419:0crwdne2935419:0
crwdns2936315:0crwdne2936315:0
crwdns2936321:0crwdne2936321:0
crwdns2931653:07crwdne2931653:0
iPhone 13 mini Opening Procedure, Insert an opening pick: crwdns2935265:00crwdnd2935265:01crwdnd2935265:03crwdne2935265:0 iPhone 13 mini Opening Procedure, Insert an opening pick: crwdns2935265:00crwdnd2935265:02crwdnd2935265:03crwdne2935265:0 iPhone 13 mini Opening Procedure, Insert an opening pick: crwdns2935265:00crwdnd2935265:03crwdnd2935265:03crwdne2935265:0
Insert an opening pick

  • Pull up on the suction cup with firm, constant pressure to create a slight gap between the screen and the frame.

  • Insert an opening pick into the gap under the screen's plastic bezel.

  • Make sure to insert the pick between the plastic bezel and the metal frame. If you insert the pick between the glass screen and the plastic bezel, you'll damage your screen.

  • The watertight adhesive holding the screen in place is very strong; creating this initial gap takes a significant amount of force. If you're having a hard time opening a gap, apply more heat, and gently rock the screen up and down to weaken the adhesive until you create enough of a gap to insert your tool.

Inserisci un plettro di apertura

Tira la ventosa verso l'alto con una forza decisa e costante per creare una piccola fessura tra il pannello frontale e il case posteriore.

Inserisci un plettro di apertura nella fessura sotto la scocca di plastica dello schermo.

L'adesivo stagno che tiene fermo lo schermo è molto resistente: creare la fessura iniziale richiede parecchia forza. Se stai avendo problemi a crearla, scalda ulteriormente il bordo inferiore e muovi su e giù lo schermo per ammorbidire l'adesivo fino a creare una fessura sufficiente per infilarci il plettro.

[title] Insert an opening pick
[* black] Pull up on the suction cup with firm, constant pressure to create a slight gap between the screen and the frame.
[* black] Insert an opening pick into the gap under the screen's plastic bezel.
+ [* icon_caution] Make sure to insert the pick between the plastic bezel and the metal frame. If you insert the pick between the glass screen and the plastic bezel, you'll damage your screen.
[* icon_note] The watertight adhesive holding the screen in place is very strong; creating this initial gap takes a significant amount of force. If you're having a hard time opening a gap, apply more heat, and gently rock the screen up and down to weaken the adhesive until you create enough of a gap to insert your tool.

crwdns2944171:0crwdnd2944171:0crwdnd2944171:0crwdnd2944171:0crwdne2944171:0