crwdns2933423:0crwdne2933423:0

Démontage de l’IBM ThinkPad 701C/CS

crwdns2935425:01crwdne2935425:0

crwdns2936315:0crwdne2936315:0
crwdns2936317:0crwdne2936317:0
crwdns2931653:01crwdne2931653:0
IBM ThinkPad 701C/CS Disassembly, Remove the top plate screws: crwdns2935265:00crwdnd2935265:01crwdnd2935265:02crwdne2935265:0 IBM ThinkPad 701C/CS Disassembly, Remove the top plate screws: crwdns2935265:00crwdnd2935265:02crwdnd2935265:02crwdne2935265:0
Remove the top plate screws
  • This guide will use the IBM Service Manual two-letter screw reference IDs in brackets after the length. These IDs are found on page 161 of the service manual.

  • Remove the 6mm (BC) screw with a T6 Torx bit from the right side by the screen hinge.

  • Rotate the laptop so the screen hinge is at the rear. Remove the 16mm (BK) screw using a T6 Torx bit.

Retirez la vis de 5 mm avec un embout Torx T6 du côté droit de la charnière de l’écran.

Retournez l’ordinateur portable de sorte que la charnière de l’écran se trouve à l’arrière. Retirez la vis de 16 mm à l’aide d’un embout Torx T6.

[title] Remove the top plate screws
-[* red] Remove the 5mm screw with a T6 Torx bit from the right side by the screen hinge.
-[* orange] Rotate the laptop so the screen hinge is at the rear. Remove the 16mm screw using a T6 Torx bit.
+[* icon_note] This guide will use the [link|https://github.com/hrushka/701c.org/blob/main/assets/archive/IBM_ThinkPad_701_HMM.pdf|IBM Service Manual|new_window=true] ***two-letter screw reference IDs ***in brackets after the length. These IDs are found on ***page 161*** of the service manual.
+[* red] Remove the 6mm (***BC***) screw with a T6 Torx bit from the right side by the screen hinge.
+[* orange] Rotate the laptop so the screen hinge is at the rear. Remove the 16mm (***BK***) screw using a T6 Torx bit.

crwdns2944171:0crwdnd2944171:0crwdnd2944171:0crwdnd2944171:0crwdne2944171:0