ESGE Magic Wand - Bamix disassemble

crwdns2936071:01crwdne2936071:0 — Remove top cover

Unplug the power cord and remove the cutter blade.

crwdns2936071:02crwdne2936071:0

This is what it looks like under the cover.

crwdns2936071:03crwdne2936071:0

The handle is fastened with a Torx T8 machine screw and a Torx T8 plastic screw. You will need a long screwdriver.

crwdns2936071:04crwdne2936071:0

On newer models, the handle looks slightly different, see picture 1.

crwdns2936071:05crwdne2936071:0

Unclip the handle from one side.

crwdns2936071:06crwdne2936071:0

First try If the bell can be unscrewed. It is fastened with a left-hand thread, so turn it in the "wrong direction", clockwise, to loosen it.

crwdns2936071:07crwdne2936071:0

Pull off the lower case over the shaft.