crwdns2933423:0crwdne2933423:0

三星 Galaxy Note20 Ultra 屏幕更换

crwdns2936315:0crwdne2936315:0
crwdns2936311:0crwdne2936311:0
crwdns2931653:04crwdne2931653:0
Samsung Galaxy Note20 Ultra Screen Replacement, Separate the perimeter adhesive: crwdns2935265:00crwdnd2935265:01crwdnd2935265:03crwdne2935265:0 Samsung Galaxy Note20 Ultra Screen Replacement, Separate the perimeter adhesive: crwdns2935265:00crwdnd2935265:02crwdnd2935265:03crwdne2935265:0 Samsung Galaxy Note20 Ultra Screen Replacement, Separate the perimeter adhesive: crwdns2935265:00crwdnd2935265:03crwdnd2935265:03crwdne2935265:0
Separate the perimeter adhesive
  • Apply a suction cup to the heated top edge of the screen, as close to the edge as possible.

  • If your screen is badly cracked, covering it with a layer of clear packing tape may allow the suction cup to adhere. Alternatively, very strong tape may be used instead of the suction cup. If all else fails, you can superglue the suction cup to the broken screen.

  • Pull up on the suction cup with a steady force to create a gap between the screen and the frame.

  • Depending on the age of your phone, this may be difficult. If you are having trouble creating a gap for the opening pick, apply more heat to the edge and try again. You may need to repeat this step multiple times.

  • Insert the tip of an opening pick into the gap at a steep angle. Push down the opening pick so that it is level with the screen.

  • Make sure the opening pick slides over the front-facing camera and is not pushing against it.

  • Leave the opening pick in the gap to prevent the adhesive from re-sealing.

将吸盘放在加热的屏幕顶部边缘,尽可能靠近边缘。

如果你的屏幕严重破裂,用一层透明包装胶带覆盖它可能会使吸盘粘住。或者,可以使用非常结实的胶带代替吸盘。如果所有其它方法都失败了,你可以将吸盘强力粘在破损的屏幕上。

用稳定的力拉起吸盘,在屏幕和框架之间形成间隙。

根据你手机的使用年限,这可能很困难。如果你在为创建间隙时遇到问题,请对边缘施加更多热量,然后重试。你可能需要多次重复此步骤。

将撬片的尖端以陡峭的角度插入间隙。向下推撬片,使其与屏幕齐平。

确保撬片滑过前置摄像头并且没有推到它。

将撬片留在间隙中以防止粘合剂重新密封。

crwdns2944171:0crwdnd2944171:0crwdnd2944171:0crwdnd2944171:0crwdne2944171:0