Dismantle Nespresso CitiZ

crwdns2936071:01crwdne2936071:0

Never forget: pull the plug!

crwdns2936071:02crwdne2936071:0

The bottom is secured by oval head screws.

crwdns2936071:03crwdne2936071:0

The bottom panel is just snapped into place. Insert a metal spudger into the slots and lift the panel out. It sits quite tightly and you might use some force to get it out.

crwdns2936071:04crwdne2936071:0

Remove the large bottom panel.

crwdns2936071:05crwdne2936071:0

Use a spudger to slide off the two silicon tubes.

crwdns2936071:06crwdne2936071:0

Disconnect the two spade plugs on the blue and brown wires from the power switch. The two left ones remain.

crwdns2936071:07crwdne2936071:0

Remove four oval head screws from the small bottom panel.

crwdns2936071:08crwdne2936071:0

The two colored side panels are only snapped into place. However, the latches sit very tight. You really need a lot of force. First lift the lower edge using a plastic opening tool.

crwdns2936071:09crwdne2936071:0

Insert a opening tool in the gap on the bottom of the coffee spout. Pry it off carefully.