iPhone 12 Pro 显示屏总成更换

crwdns2931529:0crwdnd2931529:0crwdnd2931529:0crwdnd2931529:08crwdnd2931529:0crwdne2931529:0

crwdns2935425:07crwdne2935425:0

crwdns2936315:0crwdne2936315:0

crwdns2936311:0crwdne2936311:0

crwdns2931653:07crwdne2931653:0

Lift the screen slightly

Pull up on the suction cup with firm, constant pressure to create a slight gap between the screen and the frame.
Insert an opening pick at a steep angle into the gap.
Make sure to insert the opening pick under the thick plastic bezel to avoid damaging your screen. You should see a visual gap, and the pick shouldn't catch on anything. If you can't see the gap, you'll need to pull the screen up more.
The watertight adhesive holding the screen in place is very strong; creating this initial gap takes a significant amount of force. If you're having a hard time opening a gap, apply more heat, and gently rock the screen up and down to weaken the adhesive until you create enough of a gap to insert your tool.

轻轻抬起屏幕

用力、恒定的压力向上拉吸盘，在屏幕和后壳之间形成微小的间隙。
将撬片插入屏幕塑料边框下方的缝隙中。
将显示器固定到位的防水粘合剂非常坚固；创建这个初始间隙需要很大的力量。如果你很难打开缝隙，请施加更多热量，然后轻轻上下摇动屏幕以削弱粘合剂，直到产生足够的缝隙以插入撬片。

	[title] Lift the screen slightly
	[* black] Pull up on the suction cup with firm, constant pressure to create a slight gap between the screen and the frame.
-	[* black] Insert an opening pick into the gap [https://guide-images.cdn.ifixit.com/igi/JRLPxnWrFi2XoeGy.full\|under the screen's plastic bezel\|new_window=true].
-	[* icon_note] The watertight adhesive holding the screen in place is very strong; creating this initial gap takes a significant amount of force. If you're having a hard time opening a gap, apply more heat, and gently rock the screen up and down to weaken the adhesive until you create enough of a gap to insert your tool.
+	[* black] Insert an opening pick at a steep angle into the gap.
+	[* icon_caution] Make sure to insert the opening pick *under the thick plastic bezel* to avoid damaging your screen. You should see a visual gap, and the pick shouldn't catch on anything. If you can't see the gap, you'll need to pull the screen up more.
+	[* icon_note] The watertight adhesive holding the screen in place is very strong; creating this initial gap takes a significant amount of force. If you're having a hard time opening a gap, apply more heat, and gently rock the screen up and down to weaken the adhesive until you create enough of a gap to insert your tool.

crwdns2944171:0crwdnd2944171:0crwdnd2944171:0crwdnd2944171:0crwdne2944171:0