crwdns2933423:0crwdne2933423:0

Google Pixel 5 スクリーンの交換

crwdns2931529:0crwdnd2931529:0crwdnd2931529:0crwdnd2931529:06crwdnd2931529:0crwdne2931529:0

crwdns2935425:016crwdne2935425:0

crwdns2936315:0crwdne2936315:0
crwdns2936323:0crwdne2936323:0
crwdns2931653:016crwdne2931653:0
Google Pixel 5 Screen Replacement, Remove the screen: crwdns2935265:00crwdnd2935265:01crwdnd2935265:02crwdne2935265:0 Google Pixel 5 Screen Replacement, Remove the screen: crwdns2935265:00crwdnd2935265:02crwdnd2935265:02crwdne2935265:0
Remove the screen
  • Remove the screen.

  • Use tweezers to pick off the remaining adhesive on the case.

  • If you use isopropyl alcohol to clean the adhesive off the display, be sure to not let it splash onto any unintended components, as this can weaken their adhesive bond.

  • If you replaced the screen, check the screen's front-facing camera hole and remove any protective liners covering it.

  • If your replacement screen's display cable is held down by tape, remove the tape before installation.

  • If you are using a custom-cut adhesive, follow this guide to correctly apply new screen adhesive.

  • If you are using Tesa tape to reattach the screen, follow this guide.

  • During the boot-up process after reassembly, the screen will go through a calibration sequence. Do not touch the screen during this process, as it could result in improper touch calibration and create touch issues.

スクリーンを外します。

ピンセットを使って、ケースに残っている接着剤を除去します。

ディスプレイの接着剤をイソプロピルアルコールで洗浄する場合は、周辺の部品に引っかからないように注意してください。

組み立て直す際は、交換用スクリーンのフロントカメラ用の穴を確認して、穴を覆っている保護フィルムが残っていたら全て取り除いてください。

交換用スクリーンのディスプレイケーブルがテープで止められている場合は、テープを剥がしてから取り付けてください。

カスタムカットされた接着剤を使用する場合は、このガイドを参照して、カスタムカットされた接着ストリップを装着してください。

Tesaテープを使用する場合は、こちらのガイドを参照して、スクリーンを再装着してください。

再組み立て後の起動プロセス中に、スクリーンはキュリブレーションのシーケンスが表示されます。不適切なタッチキャリブレーションが行われ、タッチの問題が発生する可能性があるため、このプロセス中はスクリーンに触れないでください。

crwdns2944171:0crwdnd2944171:0crwdnd2944171:0crwdnd2944171:0crwdne2944171:0