crwdns2935425:08crwdne2935425:0
crwdns2931653:08crwdne2931653:0
Remove the Bluetooth antenna
-
Remove two P000, 4.8 mm long screws.
-
Remove four P000, 4.8 mm long screws.
-
Remove two P000, 10.7 mm long screws.
-
The arrow points to the Bluetooth antenna. To disconnect see step 5 of the Guide. Go to picture 2. To disconnect the cable, slide a thin, ESD-safe pry tool or tweezers under the metal neck of the connector and lift straight up from the board.
-
Picture 3. Remove the antenna from the headset.
[title] Remove the Bluetooth antenna | |
- | [* |
- | [* |
- | [* |
- | [* |
- | [* black] |
+ | [* orange] Remove two P000, 4.8 mm long screws. |
+ | [* yellow] Remove four P000, 4.8 mm long screws. |
+ | [* green] Remove two P000, 10.7 mm long screws. |
+ | [* red] The arrow points to the Bluetooth antenna. To disconnect see step 5 of the Guide. Go to picture 2. To disconnect the cable, slide a thin, ESD-safe pry tool or tweezers under the metal neck of the connector and lift straight up from the board. |
+ | [* black] Picture 3. Remove the antenna from the headset. |
crwdns2944171:0crwdnd2944171:0crwdnd2944171:0crwdnd2944171:0crwdne2944171:0