crwdns2936637:0crwdne2936637:0 crwdns2853008:0crwdne2853008:0 crwdns2918746:0crwdne2918746:0

iPhone 12 mini 打开步骤

crwdns2931529:0crwdnd2931529:0crwdnd2931529:0crwdnd2931529:08crwdnd2931529:0crwdne2931529:0

crwdns2935419:0crwdne2935419:0
crwdns2936315:0crwdne2936315:0
crwdns2936311:0crwdne2936311:0
crwdns2931653:07crwdne2931653:0
iPhone 12 mini Opening Procedure, Lift the screen slightly: crwdns2935265:00crwdnd2935265:01crwdnd2935265:03crwdne2935265:0 iPhone 12 mini Opening Procedure, Lift the screen slightly: crwdns2935265:00crwdnd2935265:02crwdnd2935265:03crwdne2935265:0 iPhone 12 mini Opening Procedure, Lift the screen slightly: crwdns2935265:00crwdnd2935265:03crwdnd2935265:03crwdne2935265:0
Lift the screen slightly

  • Pull up on the suction cup with firm, constant pressure to create a slight gap between the screen and the metal frame.

  • A plastic bezel is secured to the underside of the display, and needs to lift up with the display. Inserting a pick between the bezel and the display will damage the panel.

  • Insert an opening pick into the gap under the screen's plastic bezel.

  • Make sure the opening pick is placed under the plastic bezel (against the frame) to avoid damaging your screen.

  • The watertight adhesive holding the screen in place is very strong; creating this initial gap takes a significant amount of force. If you're having a hard time opening a gap, apply more heat, and gently rock the screen up and down to weaken the adhesive until you create enough of a gap to insert your tool.

稍微抬起屏幕

用恒定的恒定压力向上拉动吸盘，以在前面板和后壳体之间形成一个很小的间隙。

将撬片插入屏幕边框下方的间隙中。

将屏幕固定在位的防水粘合剂非常牢固；产生此初始间隙需要大量的力。如果你在打开缝隙时遇到困难，请施加更多的热量，然后轻轻上下摇动屏幕以减弱粘合剂，直到产生足够的缝隙以插入工具。

[title] Lift the screen slightly
-[* black] Pull up on the suction cup with firm, constant pressure to create a slight gap between the screen and the frame.
+[* black] Pull up on the suction cup with firm, constant pressure to create a slight gap between the screen and the metal frame.
+ [* icon_note] A [guide|10588|plastic bezel|stepid=132754|new_window=true] is secured to the underside of the display, and needs to lift up with the display. Inserting a pick between the bezel and the display will damage the panel.
[* black] Insert an opening pick into the gap [https://guide-images.cdn.ifixit.com/igi/ntCBD1dIfEBFIeTL.full|under the screen's plastic bezel|new_window=true].
+ [* icon_caution] Make sure the opening pick is placed ***under*** the plastic bezel (against the frame) to avoid damaging your screen.
[* icon_note] The watertight adhesive holding the screen in place is very strong; creating this initial gap takes a significant amount of force. If you're having a hard time opening a gap, apply more heat, and gently rock the screen up and down to weaken the adhesive until you create enough of a gap to insert your tool.

crwdns2944171:0crwdnd2944171:0crwdnd2944171:0crwdnd2944171:0crwdne2944171:0