crwdns2936637:0crwdne2936637:0 crwdns2853008:0crwdne2853008:0 crwdns2918746:0crwdne2918746:0

iPhone 12 mini 開口方法

crwdns2931529:0crwdnd2931529:0crwdnd2931529:0crwdnd2931529:08crwdnd2931529:0crwdne2931529:0

crwdns2935419:0crwdne2935419:0
crwdns2936315:0crwdne2936315:0
crwdns2936323:0crwdne2936323:0
crwdns2931653:07crwdne2931653:0
iPhone 12 mini Opening Procedure, Lift the screen slightly: crwdns2935265:00crwdnd2935265:01crwdnd2935265:03crwdne2935265:0 iPhone 12 mini Opening Procedure, Lift the screen slightly: crwdns2935265:00crwdnd2935265:02crwdnd2935265:03crwdne2935265:0 iPhone 12 mini Opening Procedure, Lift the screen slightly: crwdns2935265:00crwdnd2935265:03crwdnd2935265:03crwdne2935265:0
Lift the screen slightly

  • Pull up on the suction cup with firm, constant pressure to create a slight gap between the screen and the metal frame.

  • A plastic bezel is secured to the underside of the display, and needs to lift up with the display. Inserting a pick between the bezel and the display will damage the panel.

  • Insert an opening pick into the gap under the screen and the plastic bezel, not the screen itself.

  • Make sure to insert the opening pick under the thick plastic bezel to avoid damaging your screen. You should see a visual gap, and the pick shouldn't catch on anything. If you can't see the gap, you'll need to pull the screen up more.

  • The watertight adhesive holding the screen in place is very strong; creating this initial gap takes a significant amount of force. If you're having a hard time opening a gap, apply more heat, and gently rock the screen up and down to weaken the adhesive until you create enough of a gap to insert your tool.

スクリーンをわずかに持ち上げる

吸盤をしっかりと一定の力で引き上げ、スクリーンと金属製フレームの間に僅かな隙間を作ります。

プラスチック製のベゼルがディスプレイの背面に取り付けられており、ディスプレイと一緒に持ち上げる必要があります。ベゼルとディスプレイの間にピックを差し込むとディスプレイパネルを破損する恐れがあります。

スクリーンのプラスチック製ベゼルの下にできた隙間にオープニングピックを差し込みます。

スクリーンを傷つけないよう、オープニングピックがプラスチック製ベゼルの下（フレームに当たるように）に正しく差し込まれていることを確認してください。

スクリーンに留められた防水用接着剤は大変強力です。この隙間をまず作るにはかなりの力が必要です。隙間がうまく作れない場合は、さらに熱を当てて接着剤を柔らかくしてください。温まったらツールを差し込めるだけの隙間ができるまで、ゆっくりとスクリーンを上下に揺らします。

[title] Lift the screen slightly
[* black] Pull up on the suction cup with firm, constant pressure to create a slight gap between the screen and the metal frame.
[* icon_note] A [guide|10588|plastic bezel|stepid=132754|new_window=true] is secured to the underside of the display, and needs to lift up with the display. Inserting a pick between the bezel and the display will damage the panel.
-[* black] Insert an opening pick into the gap [https://guide-images.cdn.ifixit.com/igi/ntCBD1dIfEBFIeTL.full|under the screen's plastic bezel|new_window=true].
- [* icon_caution] Make sure the opening pick is placed ***under*** the plastic bezel (against the frame) to avoid damaging your screen.
+[* black] Insert an opening pick into the gap under the screen and the plastic bezel, ***not the screen itself***.
+ [* icon_caution] Make sure to insert the opening pick ***[https://guide-images.cdn.ifixit.com/igi/FL4pIZcVVsmS6Jnq.full|under the thick plastic bezel|new_window=true]*** to avoid damaging your screen. You should see a visual gap, and the pick shouldn't catch on anything. If you can't see the gap, you'll need to pull the screen up more.
[* icon_note] The watertight adhesive holding the screen in place is very strong; creating this initial gap takes a significant amount of force. If you're having a hard time opening a gap, apply more heat, and gently rock the screen up and down to weaken the adhesive until you create enough of a gap to insert your tool.

crwdns2944171:0crwdnd2944171:0crwdnd2944171:0crwdnd2944171:0crwdne2944171:0