Pocophone F1 IPS LCD 屏幕和数字触控屏更换

crwdns2933809:0crwdne2933809:0

crwdns2935433:0crwdne2935433:0

Pocophone F1 SIM 卡托移除

Pocophone F1 后盖移除

Pocophone F1 断开电池

Pocophone F1 电池更换

crwdns2935443:0crwdne2935443:0

= crwdns2915112:0crwdne2915112:0 = crwdns2861241:0crwdne2861241:0

crwdns2936315:0crwdne2936315:0

crwdns2936311:0crwdne2936311:0

crwdns2936129:0crwdne2936129:0

crwdns2947189:0crwdne2947189:0

crwdns2915892:0crwdne2915892:0

Use this guide to replace a cracked or broken screen on your Xiaomi Pocophone F1.

If the frame is deformed, it's important to replace it to make sure the new screen will mount correctly and won’t suffer damage from uneven pressure.

If your battery is swollen, [[What to do with a swollen battery|take appropriate precautions|new_window=true]]. For your safety, '''discharge your battery below 25%''' before disassembling your phone. This reduces the risk of a dangerous thermal event if the battery is accidentally damaged during the repair.[br]
[br]
In order to remove the Screen & Digitizer you need to remove the battery first. Do not reuse the battery after it has been removed, as doing so is a potential safety hazard. Replace it with a new battery.

Note: This guide instructs you to replace only the screen while leaving the original frame and motherboard in place. However, some replacement screens for this phone come pre-installed in a new frame (a.k.a. chassis), which requires a very different procedure. Make sure you have the correct part before starting this guide.

You’ll need replacement adhesive to reattach components when reassembling the device.

crwdns2915888:0crwdne2915888:0

If possible, turn on your device and test your repair before installing new adhesive and resealing.[br]
[br]
Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.[br]
[br]
To reassemble your device, follow these instructions in reverse order. Apply new adhesive where necessary after cleaning the relevant areas with isopropyl alcohol (>90%).[br]
[br]
The best way to secure the new screen is to [guide|113604|apply a sheet of custom-cut double-sided tape|new_window=true] to the back of the screen.[br]
[br]
[guide|113604|Secure the new battery with pre-cut adhesive|new_window=true] or double-sided adhesive tape. In order to position it correctly, apply the new adhesive into the device at the places where the old adhesive was located, not directly onto the battery. Press the new battery firmly into place.[br]
[br]
For optimal performance, [[Battery Calibration|calibrate your newly installed battery|new_window=true]].[br]
[br]
Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].[br]
[br]
Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our [https://www.ifixit.com/Answers/Device/Pocophone%20f1|Answers community] for help.