crwdns2936637:0crwdne2936637:0 crwdns2853008:0crwdne2853008:0 crwdns2918746:0crwdne2918746:0

iMac Intel 21.5 英寸显示器胶条更换

crwdns2931529:0crwdnd2931529:0crwdnd2931529:0crwdnd2931529:08crwdnd2931529:0crwdne2931529:0

crwdns2935419:0crwdne2935419:0
crwdns2936315:0crwdne2936315:0
crwdns2936311:0crwdne2936311:0
crwdns2931653:02crwdne2931653:0
iMac Intel 21.5" Display Adhesive Strips Replacement, Remove the old adhesive: crwdns2935265:00crwdnd2935265:01crwdnd2935265:02crwdne2935265:0 iMac Intel 21.5" Display Adhesive Strips Replacement, Remove the old adhesive: crwdns2935265:00crwdnd2935265:02crwdnd2935265:02crwdne2935265:0
Remove the old adhesive

  • Before you install new adhesive strips, remove all of the old adhesive from the perimeter of the rear enclosure.

  • If you are re-using your existing display, you must also remove the old adhesive from the back of the display.

  • Peel off the old strips of adhesive using tweezers or your fingers. Start at the bottom and peel upward towards the top of the device.

  • After all the old adhesive is removed, carefully clean off the adhesive residue with high-concentration isopropyl alcohol (90% or greater) and a lint-free cloth. Wipe in one direction, not back and forth.

  • Don't skip this step, or your new adhesive strips may not bond properly, and the display may fall out of your iMac.

移除旧的胶条

安装新胶条之前，请清除后机箱周边的所有旧胶条。

如果要重复使用现有的显示屏，还必须清除显示屏背面的旧粘胶。

用镊子或手指剥离旧的胶条。从底部开始，向设备顶部向上剥离。

清除所有旧胶条后，用高浓度异丙醇（90% 或更高）和无绒布仔细擦去胶条残留物。顺着一个方向擦拭，不要来回擦拭。

请不要跳过这一步，否则新胶条可能无法正常粘合，显示屏可能会从 iMac 中脱落。

[title] Remove the old adhesive
[* icon_note] Before you install new adhesive strips, remove all of the old adhesive from the perimeter of the rear enclosure.
[* black] If you are re-using your existing display, you must also remove the old adhesive from the back of the display.
- [* black] Peel off the old strips of adhesive using tweezers or your fingers. Start at the bottom and peel ''upward'' towards the top of the device.
+ [* black] Peel off the old strips of adhesive using [product|IF145-020|tweezers] or your fingers. Start at the bottom and peel ''upward'' towards the top of the device.
[* black] After all the old adhesive is removed, carefully clean off the adhesive residue with high-concentration isopropyl alcohol (90% or greater) and a lint-free cloth. Wipe in one direction, not back and forth.
[* icon_caution] ***Don't skip this step***, or your new adhesive strips may not bond properly, and the display may fall out of your iMac.

crwdns2944171:0crwdnd2944171:0crwdnd2944171:0crwdnd2944171:0crwdne2944171:0