crwdns2936637:0crwdne2936637:0 crwdns2853008:0crwdne2853008:0 crwdns2918746:0crwdne2918746:0

三星 Galaxy S20 Plus 电池更换

crwdns2933809:0crwdne2933809:0

crwdns2935433:0crwdne2935433:0

三星 Galaxy S20 Plus 后盖移除

三星 Galaxy S20 Plus 断开电池

三星盖乐世 S20 Plus 无线充电线圈更换

三星盖乐世 S20 Ultra 扬声器更换

三星 Galaxy S20 Plus 柔性电缆移除

三星 Galaxy S20 Plus 电缆重置

crwdns2935443:0crwdne2935443:0

= crwdns2915112:0crwdne2915112:0 = crwdns2861241:0crwdne2861241:0
crwdns2936315:0crwdne2936315:0
crwdns2936311:0crwdne2936311:0
    This guide shows how to remove and replace the battery for the Samsung Galaxy S20 Plus.
    The battery is held in place with strong adhesive. High concentration (over 90%) isopropyl alcohol is necessary to loosen and release this adhesive.
    '''***If your battery is swollen, [[What to do with a swollen battery|take appropriate precautions|new_window=true]] and do not heat your phone.'''***
    '''***For your safety, discharge your battery below 25% before disassembling your phone.'''*** This reduces the risk of a dangerous thermal event if the battery is accidentally damaged during the repair.
    You'll need replacement adhesive in order to complete this repair.
      Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.
      '''***To reassemble your device, follow the above steps in reverse order.'''***
      After completing Follow ++[link|https://www.ifixit.com/Guide/How+to+Perform+a+Battery+Cycle+Reset/152044|this guide|new_window=true]++ to perform a battery cycle reset, and ++[[link|https://www.ifixit.com/Wiki/Battery _Calibration|calibrate your newly-installed battery|new_window=true]]++.
      Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
      Repair didn’t go as planned? Check out our [link|https://www.ifixit.com/Answers/Device/Samsung%20Galaxy%20S20%20Plus|Answers community] for troubleshooting help.

      crwdns2931349:0crwdne2931349:0

      crwdns2936071:01crwdne2936071:0 — 涂抹高浓度酒精

      在框架和电池边缘之间的间隙中使用高浓度（超过90％）的异丙醇。

      crwdns2936071:02crwdne2936071:0 — 将电池从粘合剂中提起来

      将吸盘放在电池中心。

      crwdns2936071:03crwdne2936071:0 — 撬动电池

      注意：在提起电池到在电池下方轻松插入三角撬片之前，请勿继续执行此步骤。如果仍将电池牢牢地粘在当前的位置，则有可能会被撬片尖刺穿电池并引起危险的热事件。

      crwdns2936071:04crwdne2936071:0 — 移除电池

      移除电池。

      crwdns2944171:0crwdnd2944171:0crwdnd2944171:0crwdnd2944171:0crwdne2944171:0