crwdns2933423:0crwdne2933423:0

Sostituzione schermo Google Pixel 4

crwdns2935443:0crwdne2935443:0

= crwdns2915112:0crwdne2915112:0 = crwdns2861241:0crwdne2861241:0
crwdns2936315:0crwdne2936315:0
crwdns2936321:0crwdne2936321:0
Screen
Display Assembly
Google Pixel 4 ScreenDisplay Assembly Replacement
    ***This repair guide was authored by the iFixit staff and hasn’t been endorsed by Google.*** Learn more about our repair guides [link|https[Info://www.ifixit.com/Info/content-quality|here|new_window=true]].
    Use this guide to remove or replace the screendisplay assembly on your Google Pixel 4.
    Due to the Pixel’s design, you will have to remove the back panel in order to disconnect the screen connector.
    ***Note:*** Follow this guide to replace the display assembly by itself. Some replacement assemblies for this phone come pre-installed in a new frame (a.k.a. chassis), which requires you to transplant all of your phone's internals and install a new battery. If you're replacing the display assembly attached to a frame, [guide|150706|follow this guide instead|new_window=true].
    Before you begin this procedure, be sure to have a set of replacement adhesives for both the back panel and the screen.
    Due to the Pixel’s design, you will have to remove the back panel in order to disconnect the display connector.
    Before you begin this procedure, be sure to have a set of replacement adhesives for both the back panel and the display panel.

    ***This procedure will almost always destructively remove the Pixel 4’s screendisplay panel.*** OLEDs cease to work when exposed to oxygen or moisture, and are thus sealed in an airtight encapsulation (this is also why OLED panels turn black underneath a screendisplay assembly crack). It is very difficult to replace the front glass alone— the Pixel’s OLED layers are laminated to the glass, and the screendisplay assembly will come out as one unit.
    ***Caution:*** Google warns that disassembly of the front laser assembly could result in hazardous exposure to invisible infrared laser emissions. Read their safety warnings [link|https://support.google.com/pixelphone/answer/9369238?hl=en|here].

      crwdns2931349:0crwdne2931349:0

      crwdns2936071:01crwdne2936071:0

      Usa uno spudger per scollegare il connettore dello schermo dalla scheda madre.

      crwdns2936071:02crwdne2936071:0 — Taglia l'adesivo dello schermo

      Prepara un iOpener e appoggialo al bordo destro dello schermo per un minuto.

      crwdns2936071:03crwdne2936071:0

      Questa procedura distruggerà quasi sempre il pannello OLED dello schermo. Procedi solo se stai sostituendo uno schermo già rotto.

      crwdns2936071:04crwdne2936071:0

      Fai scorrere il plettro tra lo schermo e la cornice verso l'angolo in basso del bordo destro per tagliare l'adesivo.

      crwdns2936071:05crwdne2936071:0

      Infila un secondo plettro sotto l'angolo in alto a sinistra del telefono, vicino al foro della fotocamera anteriore.

      crwdns2936071:06crwdne2936071:0

      Infila un terzo plettro sotto lo schermo al centro del bordo destro del telefono e ruotalo per separare lo schermo.

      crwdns2936071:07crwdne2936071:0 — Inclina lo schermo

      Inclina lo schermo sollevandone il bordo sinistro.

      crwdns2936071:08crwdne2936071:0 — Rimuovi lo schermo

      Rimuovi lo schermo.

      crwdns2944171:0crwdnd2944171:0crwdnd2944171:0crwdnd2944171:0crwdne2944171:0