crwdns2933423:0crwdne2933423:0

Google Pixel 4 バッテリーの交換

crwdns2931529:0crwdnd2931529:0crwdnd2931529:0crwdnd2931529:06crwdnd2931529:0crwdne2931529:0

crwdns2935425:01crwdne2935425:0

crwdns2936315:0crwdne2936315:0
crwdns2936323:0crwdne2936323:0
crwdns2931653:01crwdne2931653:0
Google Pixel 4 Battery Replacement, Remove the adhesive strips: crwdns2935265:00crwdnd2935265:01crwdnd2935265:03crwdne2935265:0 Google Pixel 4 Battery Replacement, Remove the adhesive strips: crwdns2935265:00crwdnd2935265:02crwdnd2935265:03crwdne2935265:0 Google Pixel 4 Battery Replacement, Remove the adhesive strips: crwdns2935265:00crwdnd2935265:03crwdnd2935265:03crwdne2935265:0
Remove the adhesive strips
  • Pull on the yellow pull tab of the adhesive strip with steady force.

  • If the adhesive becomes hard to pull, you can roll it around a spudger and continue pulling.

  • Continue firmly pulling up on the adhesive strip with constant force. If you're using a spudger, spin it every so often to keep the exposed section of the pull tab as short as possible.

  • This may take a lot of force.

  • These adhesive pull tabs are very prone to snapping in half during this process. Pull as slowly as possible.

  • If the adhesive pull tabs are not stretching, fill a plastic dropper or syringe with high concentration (>90%) isopropyl alcohol and apply a few drops under the left edge of the battery. Give the alcohol a minute to weaken the battery adhesive.

  • Continue this process for each of the three pull tabs, until all are either out or have snapped in half.

接着ストリップの黄色のプルタブを一定の力で引っ張ります。

接着剤を引くことが難しい場合、スパッジャーに巻き付けてさらに引っ張ります。

一定の力で接着ストリップを引き続け、スパッジャーを頻繁に回転させて、プルタブの露出部分をできるだけ短くします。

この作業には、かなりの力が必要です。

これら接着用プルタブは、作業中に切断してしまう傾向があります。 できるだけゆっくり引っ張ってください。

接着用プルタブがストレッチしない場合は、プラスチック製のスポイトまたは注射器に高濃度(90%以上)のイソプロピルアルコールを入れ、 バッテリーの接着剤を弱めるために、バッテリーの左端の下に数滴注入します。それから約1分待機してください。

3本全てのプルタブが外れるまで、この手順を続けます。

crwdns2944171:0crwdnd2944171:0crwdnd2944171:0crwdnd2944171:0crwdne2944171:0