crwdns2936637:0crwdne2936637:0 crwdns2853008:0crwdne2853008:0 crwdns2918746:0crwdne2918746:0

Reemplazo de la pantalla del Google Pixel 4 XL

crwdns2933809:0crwdne2933809:0

crwdns2935433:0crwdne2935433:0

Reemplazo de la bandeja de la tarjeta SIM del Google Pixel 4 XL

Reemplazo del panel trasero del Google Pixel 4 XL

Ensamblaje del sensor y cámara frontal del Google Pixel 4 XL

crwdns2935443:0crwdne2935443:0

= crwdns2915112:0crwdne2915112:0 = crwdns2861241:0crwdne2861241:0
crwdns2936315:0crwdne2936315:0
crwdns2936331:0crwdne2936331:0
Screen
Display Assembly
Google Pixel 4 XL ScreenDisplay Assembly Replacement
    Use this guide to remove or replace the screen assembly on your Google Pixel 4 XL.
    ***This repair guide was authored by the iFixit staff and hasn’t been endorsed by Google.*** Learn more about our repair guides [[Info:content-quality|here|new_window=true]].
    Due to the Pixel’s design, you will have to remove the back panel in order to disconnect the screen connector.
    Use this guide to remove or replace the display assembly on your Google Pixel 4 XL.
    Before you begin this procedure, be sure to have a set of replacement adhesives for both the back panel and the screen.
    ***Note:*** Follow this guide to replace the display assembly by itself. Some replacement assemblies for this phone come pre-installed in a new frame (a.k.a. chassis), which requires you to transplant all of your phone's internals and install a new battery. If you're replacing the display assembly attached to a frame, [guide|151100|follow this guide instead|new_window=true].
    '''This procedure will almost always destructively remove the Pixel 4 XL’s screen.''' OLEDs cease to work when exposed to oxygen or moisture, and are thus sealed in an airtight encapsulation (this is also why OLED panels turn black underneath a screen crack). It is very difficult to replace the front glass alone— the Pixel’s OLED layers are laminated to the glass, and the screen will come out as one unit.
    Due to the Pixel’s design, you will have to remove the back panel in order to disconnect the display connector.
    '''Before you begin this procedure, be sure to have a set of replacement adhesives for both the back panel and the display panel.

    ***This procedure will almost always destructively remove the Pixel 4 XL’s display assembly.*** OLEDs cease to work when exposed to oxygen or moisture, and are thus sealed in an airtight encapsulation (this is also why OLED panels turn black underneath a display assembly crack). It is very difficult to replace the front glass alone— the Pixel’s OLED layers are laminated to the glass, and the display assembly will come out as one unit.

    ***    Caution:'''*** Google warns that disassembly of the front laser assembly could result in hazardous exposure to invisible infrared laser emissions. Read their safety warnings [link|https://support.google.com/pixelphone/answer/9369238?hl=en|here].
      Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.
      '''***To reassemble your device, follow the above steps in reverse order.'''***
      Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
      Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our [link|https://www.ifixit.com/Answers/Device/Google%20Pixel%204%20XL|Answers community] for help.

      crwdns2931349:0crwdne2931349:0

      crwdns2936071:01crwdne2936071:0 — Desconecta el conjunto de la pantalla

      Usa un destornillador T3 Torx para remover los cuatro tornillos de 3.5 mm que sujetan la tapa del conector de la pantalla.

      crwdns2936071:02crwdne2936071:0

      Usa un par de pinzas para remover la tapa del conector de la pantalla.

      crwdns2936071:03crwdne2936071:0

      Usa el extremo plano de un spudger para desconectar el conector de la pantalla de la placa madre.

      crwdns2936071:04crwdne2936071:0 — Corta el adhesivo del monitor

      Prepara un iOpener y aplícalo en el borde derecho de la pantalla cerca del botón de encendido durante un minuto.

      crwdns2936071:05crwdne2936071:0

      Este proceso casi siempre destruirá el panel de visualización OLED. Continúa solo si estás reemplazando un ensamblaje de pantalla que ya está roto.

      crwdns2936071:06crwdne2936071:0

      Desliza la púa de apertura hacia abajo en el bisel derecho del teléfono, entre la pantalla y el marco, para cortar el adhesivo.

      crwdns2936071:07crwdne2936071:0

      Inserta una segunda púa de apertura debajo del conjunto de la pantalla en la esquina superior izquierda del teléfono, cerca del recorte de la cámara frontal.

      crwdns2936071:08crwdne2936071:0

      Inserta una tercer púa de apertura debajo del conjunto de la pantalla en el centro del borde derecho del teléfono y gírala para separar el conjunto de la pantalla.

      crwdns2936071:09crwdne2936071:0 — Inclina el monitor hacia arriba

      Inclina el conjunto de la pantalla hacia arriba a lo largo del borde izquierdo del teléfono.

      crwdns2936071:010crwdne2936071:0 — Pasa el conector de pantalla a través del marco

      Desliza el conector de la pantalla fuera del orificio cerca de la placa madre para separar el conjunto de la pantalla del resto del teléfono.

      crwdns2936071:011crwdne2936071:0 — Retira el conjunto de la pantalla

      Retira el conjunto de la pantalla.

      crwdns2944171:0crwdnd2944171:0crwdnd2944171:0crwdnd2944171:0crwdne2944171:0