Redmi note 6 Pro R charging port replacement

crwdns2936071:01crwdne2936071:0 — Preparing the device

First and very importantly, we have to make sure that the charge level of the battery is not below 20% nor over 80%. These levels cause the most stress on batteries and we want to make sure that nothing happens during the repair. It is recommended that it should be at 50%.

crwdns2936071:02crwdne2936071:0 — Opening the device

We have to be very careful and have patience when opening the the device; you have to use a spudger and hold the opening with a guitar pick, a card or something similar.

crwdns2936071:03crwdne2936071:0 — Removing the cover

All the screws in this repair are PH00 heads.

crwdns2936071:04crwdne2936071:0 — Disconnecting the battery

Now we need to remove the two screws the hold the shield in place (step 5 in the PDF guide).

crwdns2936071:05crwdne2936071:0 — Removing the vibration motor and speaker

If the warranty is still valid, performing this operation will completely void the warranty.

crwdns2936071:06crwdne2936071:0 — Disconnecting and removing the charging plate

First, we perform the actions marked in red, then, the ones in orange.