Dexter Wired Vibrating Sander 330W - 330SHS2.5 Engine Replacement

crwdns2936071:01crwdne2936071:0 — Unplug

Before you start, remember to disconnect the outlet from the mains.

crwdns2936071:02crwdne2936071:0

Remove the dust box and the seal on the back of the device.

crwdns2936071:03crwdne2936071:0

Unscrew the six screws of the pad.

crwdns2936071:04crwdne2936071:0

Using a screwdriver or screwdriver, unscrew and open the device.

crwdns2936071:05crwdne2936071:0

Lift the two carbons with a screwdriver to get them out of their homes.

crwdns2936071:06crwdne2936071:0

Remove the rotor from its housing.

crwdns2936071:07crwdne2936071:0

Press the tab to disconnect the coal from the engine.

crwdns2936071:08crwdne2936071:0

Unscrew the domino screws to disconnect the cables.

crwdns2936071:09crwdne2936071:0

Separate the wire connected to the motor.

crwdns2936071:010crwdne2936071:0

Cut the rat cable with a cutting pliers.

crwdns2936071:011crwdne2936071:0

Unsolder the cable connected to the speed dimmer.

crwdns2936071:012crwdne2936071:0

Approach the soldering iron to heat the tin and make it soft. Using the pump, remove the residues.

crwdns2936071:013crwdne2936071:0

Take out the old engine to replace it with the new one.

crwdns2936071:014crwdne2936071:0

Replace the cable of the new motor on the speed dimmer.

crwdns2936071:015crwdne2936071:0

With tin, unsolder the wire on the frame to hold it.

crwdns2936071:016crwdne2936071:0

Replace the speed dimmer in its housing.

crwdns2936071:017crwdne2936071:0

Replace the most black thread in the domino.

crwdns2936071:018crwdne2936071:0

Replace each room in its housing.

crwdns2936071:019crwdne2936071:0

Reconnect the carbons.

crwdns2936071:020crwdne2936071:0

Replace the new engine.

crwdns2936071:021crwdne2936071:0

Replace the engine at its location.

crwdns2936071:022crwdne2936071:0

Be careful to put the black cable back into its housing so as not to block during the reassembly of the machine.

crwdns2936071:023crwdne2936071:0

Put the carbons back in their place.

crwdns2936071:024crwdne2936071:0

Replace the shell, then screw it back on.

crwdns2936071:025crwdne2936071:0

Reposition the part, then lock the engine with a screwdriver to screw.

crwdns2936071:026crwdne2936071:0

Finally, reposition the vacuum bag.