Hyla NST Vacuum Cleaner Power Cord Replacement

crwdns2936071:01crwdne2936071:0 — Remove the handle face plate

Use a spudger to lift the face plate on the handle and then pull it straight up to remove it.

crwdns2936071:02crwdne2936071:0 — Remove cable cover

Under the face plate you can find two Philipshead screws. Remove them and then the handle and the cable cover can be removed.

crwdns2936071:03crwdne2936071:0 — Remove case cover

Now the case cover can be removed by firmly pulling it up.

crwdns2936071:04crwdne2936071:0 — Remove strain relieve

Now the strain relieve can be removed by unscrewing the two Philips head screws.

crwdns2936071:05crwdne2936071:0 — Remove the power cord

Unscrew the leads of the old power cord from the screw terminal and remove the old power cord.

crwdns2936071:06crwdne2936071:0 — Connect the new power cord

Ensure that the replacement power cord has ferules on both leads.

crwdns2936071:07crwdne2936071:0 — Reassembly

Now reassemble the device by following the steps in reverse order starting at step 4.