OnePlus 7 Pro Battery Cover Replacement

crwdns2936071:01crwdne2936071:0

Insert and gently push the SIM card ejector tool (or an unfolded paperclip) into the small hole on the left side of the top edge of the phone.

crwdns2936071:02crwdne2936071:0

Use a heat gun to lightly heat the edges of the back to soften the adhesive that connects the back cover to the rest of the frame.

crwdns2936071:03crwdne2936071:0

Apply a suction cup to the lower portion of the phone's backing and pull firmly to create a crack between the back cover and the rest of the phone.

crwdns2936071:04crwdne2936071:0

Use a plastic card or Jimmy tool to slice around the phone's seam, cutting through the adhesive.

crwdns2936071:05crwdne2936071:0

Remove the phone's back cover.

crwdns2936071:06crwdne2936071:0

Use a pair of tweezers to lift up the piece of black tape covering the laser autofocus and flash flex cable.

crwdns2936071:07crwdne2936071:0

Use the flat end of a spudger to disconnect the laser autofocus and flash flex cable.

crwdns2936071:08crwdne2936071:0

Peel off the adhesive cover for the new battery cover.