crwdns2935425:04crwdne2935425:0
crwdns2931653:04crwdne2931653:0
-
Remove the metal panel from the body and use the spudger to detach the three ribbon wires attached to the motherboard.
-
Remove the two 3.2 mm silver screws, which secure the motherboard using a Phillips #000 screwdriver.
-
Lift and remove the motherboard from the camera body.
- | [* red] After removing metal panel, use the spudger to detach the the 3 ribbon wires attached to the motherboard. Now, remove the silver 3.2 mm Phillips #000 screws holding the motherboard in place. Lastly, lift the board from the top of the camera and pull board upwards, pulling out the AV port with it. |
---|---|
+ | [* red] Remove the metal panel from the body and use the spudger to detach the three ribbon wires attached to the motherboard. |
+ | [* red] Remove the two 3.2 mm silver screws, which secure the motherboard using a Phillips #000 screwdriver. |
+ | [* black] Lift and remove the motherboard from the camera body. |
+ | [* icon_note] The AV port will be attached to the motherboard. |
crwdns2944171:0crwdnd2944171:0crwdnd2944171:0crwdnd2944171:0crwdne2944171:0