Replacement of the motherboard of Xiaomi Redmi Note 7 Pro Motherboard Replacement

crwdns2936071:01crwdne2936071:0

Before you begin, switch off your phone.

crwdns2936071:02crwdne2936071:0

Lift the back cover to create a gap between the glass and the frame.

crwdns2936071:03crwdne2936071:0

Start sliding the opening pick from the lower left corner along the side of the device to cut the adhesive

crwdns2936071:04crwdne2936071:0

Lift the cover open like a book, but be careful to make sure you do not damage the flex cable while it’s still connected.

crwdns2936071:05crwdne2936071:0

Using a screwdriver (1.5 mm ), unscrew 4 screw and remove the bracket holding the connector.

crwdns2936071:06crwdne2936071:0

Disconnect the connector to avoid a possible short circuit during disassembly.

crwdns2936071:07crwdne2936071:0

Using a screwdriver (1.5 mm), unscrew the 7 screws.

crwdns2936071:08crwdne2936071:0

Pry up on the connector and remove the fingerprint sensor cable.

crwdns2936071:09crwdne2936071:0

Disconnect the connector on PCB, and remove the front facing (selfie) camera.

crwdns2936071:010crwdne2936071:0

Disconnect the connectors on the PCB.

crwdns2936071:011crwdne2936071:0

Pull off and remove the PCB.