Samsung Galaxy A20e Display Replacement

crwdns2936071:01crwdne2936071:0

Remove the SIM and MicroSD tray.

crwdns2936071:02crwdne2936071:0

Release the back cover with the help of a thin blade or a Jimmy. Insert the tool between the frame display and the cover unclipping it along the entire perimeter.

crwdns2936071:03crwdne2936071:0

Disconnect the Fingerprint scanner.

crwdns2936071:04crwdne2936071:0

Using a Philips #00 screwdriver, remove the 13 screws securing the inner cover.

crwdns2936071:05crwdne2936071:0

Now you can remove the upper and lower covers that protect the logic board and the speaker respectively.

crwdns2936071:06crwdne2936071:0

Pry up the following four connectors:

crwdns2936071:07crwdne2936071:0 — Remove The Battery

Remove the battery by placing a few drops of alcohol underneath the battery and letting it sit for about a minute. This will weaken the double-sided adhesive that holds the battery.

crwdns2936071:08crwdne2936071:0

Disconnect the two blue and white antenna wires.

crwdns2936071:09crwdne2936071:0

Remove the glued-on vibration motor with the help of a small amount of heat

crwdns2936071:010crwdne2936071:0

Once you have completed the component removal, you can begin the reassembly by placing the components on the new display.