crwdns2933423:0crwdne2933423:0

Hoe gebruik je op maat gemaakte kleefstrips?

crwdns2936315:0crwdne2936315:0
crwdns2936313:0crwdne2936313:0
crwdns2931653:04crwdne2931653:0
How to Apply Custom-cut Adhesive Strips, Remove the adhesive liner: crwdns2935265:00crwdnd2935265:01crwdnd2935265:03crwdne2935265:0 How to Apply Custom-cut Adhesive Strips, Remove the adhesive liner: crwdns2935265:00crwdnd2935265:02crwdnd2935265:03crwdne2935265:0 How to Apply Custom-cut Adhesive Strips, Remove the adhesive liner: crwdns2935265:00crwdnd2935265:03crwdnd2935265:03crwdne2935265:0
Remove the adhesive liner
  • Once you have a good idea how the adhesive strip fits on the surface, peel the neutral/clear liner off.

  • If you're applying a back cover or screen adhesive and it comes with extra material in the center, you may need to remove it before applying the adhesive.

  • Carefully peel away the center portion of both the liner and adhesive layers, starting with the cutout (if present).

  • Peel off and discard the remaining neutral/clear liner, exposing the adhesive underneath.

Normaal gesproken hebben kleefstrips een gekleurde en een niet-gekleurde (papieren of doorzichtig plasticen) kant. De niet-gekleurde kant van de strip moet als eerste worden aangebracht.

Zorg ervoor dat je, voordat je de bescherming van de kleefstrip aftrekt, de locatie van de niet-gekleurde kant hebt vastgesteld.

Om het plakken makkelijker te maken, kun je de strip op de juiste plek leggen om vervolgens één kant vast te tapen zodat de strip op z'n plek blijft liggen. Hierdoor kun je de beschermlaag eraf trekken zonder dat de kleefstrip verschuift.

Als je weet waar je de kleefstrip gaat aanbrengen, kun je de niet-gekleurde beschermlaag eraf trekken.

Als je een kleefstrip voor het scherm of de achterste behuizing aanbrengt, kan het zijn dat je een overbodige middenstuk uit de kleefstrip moet halen:

Haal het middenstuk, zowel de witte (papier) als de zwarte (kleefkant) laag, er voorzichtig uit, beginnend met de U-vormige uitsnede (als deze er is).

Haal de overgebleven beschermlaag eraf, zodat de kleefkant vrijkomt.

[title] Remove the adhesive liner
-[* icon_note] Generally, adhesives strips have a colored side and a non-colored (paper or clear plastic) side. ***The non-colored side of the strip should be applied first.***
-[* black] Before you peel any liners, locate the surface the non-colored side should stick to.
- [* black] To make adhesive application easier, you can align the strip to its intended position on the phone, [https://d3nevzfk7ii3be.cloudfront.net/igi/WUXP4Wk5iqub5PEF.large|then tape one edge down to hold the strip in place|new_window=true]. This will allow you to peel away the liners and expose the adhesive without losing alignment.
-[* black] Once you have a good idea how the adhesive strip fits on the surface, peel the non-colored liner off.
-[* icon_note] If you are applying a back cover or screen adhesive, you may need to peel out the unnecessary center portion of the adhesive strip:
- [* black] Carefully peel away the center portion of both the white (paper) and black (adhesive) layers, [https://d3nevzfk7ii3be.cloudfront.net/igi/MooIq3wXf33HLMWs.large|starting with the U-shaped cutout (if present)|new_window=true].
- [* black] Peel off and discard the remaining paper liner, exposing the adhesive underneath.
+[* black] Once you have a good idea how the adhesive strip fits on the surface, peel the neutral/clear liner off.
+[* icon_note] If you're applying a back cover or screen adhesive and it comes with extra material in the center, you may need to remove it before applying the adhesive.
+ [* black] Carefully peel away the center portion of both the liner and adhesive layers, [https://d3nevzfk7ii3be.cloudfront.net/igi/MooIq3wXf33HLMWs.huge|starting with the cutout (if present)|new_window=true].
+ [* black] Peel off and discard the remaining neutral/clear liner, exposing the adhesive underneath.

crwdns2944171:0crwdnd2944171:0crwdnd2944171:0crwdnd2944171:0crwdne2944171:0