crwdns2933423:0crwdne2933423:0

Sostituzione AMOLED e digitizer Xiaomi Mi 9

crwdns2936315:0crwdne2936315:0
crwdns2936321:0crwdne2936321:0
crwdns2931653:03crwdne2931653:0
Xiaomi Mi 9 AMOLED & Digitizer Replacement: crwdns2935265:00crwdnd2935265:01crwdnd2935265:03crwdne2935265:0 Xiaomi Mi 9 AMOLED & Digitizer Replacement: crwdns2935265:00crwdnd2935265:02crwdnd2935265:03crwdne2935265:0 Xiaomi Mi 9 AMOLED & Digitizer Replacement: crwdns2935265:00crwdnd2935265:03crwdnd2935265:03crwdne2935265:0
  • You can use a piece of cloth to minimize the phone rocking over the camera bump.

  • Apply a suction handle near the top edge of the phone right under the earpiece speaker.

  • If the phone's screen is cracked, the suction handle may not stick. Try lifting it with strong tape, or superglue the suction handle in place and allow it to cure so you can proceed.

  • Use the suction handle to pull up the screen and insert just the tip of an opening pick under the right edge of the speaker recess.

  • Rotate the opening pick sideways to bring the long edge of the pick under the display glass and slide it to the top right corner. Leave it there to prevent the adhesive from resealing.

Puoi usare un panno per minimizzare il movimento dovuto allo scalino della fotocamera.

Fai aderire una ventosa vicino al bordo superiore del telefono, appena sotto la capsula auricolare.

Se lo schermo del telefono è crepato, la ventosa potrebbe non fare presa. Cerca di sollevarlo con del nastro adesivo resistente, oppure incolla con della supercolla la ventosa sul vetro e lasciala asciugare per procedere.

Usa la ventosa per sollevare lo schermo ed infilare solo la punta di un plettro sotto il vetro a destra della capsula auricolare.

Ruota il plettro di lato per infilarne il lato lungo sotto lo schermo e fallo scorrere fino all'angolo in alto a destra. Lascia il plettro infilato qui sotto per evitare che l'adesivo si reincolli.

crwdns2944171:0crwdnd2944171:0crwdnd2944171:0crwdnd2944171:0crwdne2944171:0