Not satisfied with merely removing the modules, we bust out our Torx T5 screwdriver and an opening pick and tear down even more.

Starting with the top module:

The 8 MP ƒ2.0 selfie camera and earpiece speaker are both removable.

The headphone jack as well as the proximity and ambient light sensors are soldered onto the breakout board.

The camera module carries a modular 12 MP ƒ1.8 camera with a SONY IMX363 Exmor RS sensor. The flash LEDs are soldered onto the breakout board.

The bottom module contains the vibration motor, and a soldered-on USB-C port and microphone.

The loudspeaker module is the loneliest of the bits clinging onto the bottom module with its two contacts.