crwdns2933423:0crwdne2933423:0

Huawei Honor 10 Akku austauschen

crwdns2935443:0crwdne2935443:0

= crwdns2915112:0crwdne2915112:0 = crwdns2861241:0crwdne2861241:0
crwdns2936315:0crwdne2936315:0
crwdns2936319:0crwdne2936319:0
Akku
Battery
Huawei Honor 10 Akku austauschenBattery Replacement
    Verwende diese Anleitung, um den Akku in deinem Huawei Honor 10 auszutauschen.
    Use this guide to replace a worn-out or dead battery in your Honor 10.
    If your battery is swollen, [[What to do with a swollen battery|take appropriate precautions|new_window=true]]. For your safety, '''discharge your battery below 25%''' before disassembling your phone. This reduces the risk of a dangerous thermal event if the battery is accidentally damaged during the repair.
    Although it’s possible to remove the battery without removing the loudspeaker unit and the interconnect flex cable, we recommend doing so to make the removal procedure easier and to prevent damage to the interconnect flex cable.
    You’ll need '''replacement adhesive''' to reattach components when reassembling the device.
      Um dein Gerät wieder zusammenzubauen, folge dieser Anleitung in umgekehrter Reihenfolge.
      If possible, turn on your phone and '''test your repair''' before installing new adhesive and resealing the phone.
      Schalte, '''wenn möglich''', dein Smartphone ein, um deine '''Reparatur zu testen''', bevor du neue Klebestreifen einsetzt und das Gerät wieder verschließt.
      '''Secure the new battery''' with pre-cut adhesive or double-sided adhesive tape. In order to position it correctly, apply the new adhesive into the phone at the places where the old adhesive was located, not directly onto the battery. Press the new battery firmly into place.
      '''Befestige den neuen Akku''' mit vorgestanzten Klebestreifen oder doppelseitigem Klebeband und drücke ihn 5-10 Sekunden lang fest.
      For optimal performance, '''[[Battery Calibration|calibrate]] your newly installed battery''': Charge it to 100%, and keep charging it for at least two more hours. Then, use it until it shuts off due to low battery. Finally, charge it uninterrupted to 100%
      Für eine optimale Leistung, und um Software-Fehlern vorzubeugen, solltest du deinen '''neu eingebauten Akku kalibrieren''': Entlade den Akku auf unter 10% und lade ihn dann ohne Unterbrechung auf 100% auf.
      To reassemble your device, follow these instructions in reverse order.
      Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
      Repair didn’t go as planned? Check out our [https://www.ifixit.com/Answers/Device/Huawei%20Honor%2010|Answers community] for troubleshooting help.

      crwdns2931349:0crwdne2931349:0

      crwdns2936071:01crwdne2936071:0 — Akku Austauschen

      Verwende einen Spudger, um die untere Verbindung des Haupt-Flachbandkabels zu trennen.

      crwdns2936071:02crwdne2936071:0

      Verwende einen Spudger, um die obere Verbindung des Haupt-Flachbandkabels zu trennen.

      crwdns2936071:03crwdne2936071:0

      Verwende einen Spudger, um die Verbindung des Display-Flachbandkabels zu trennen.

      crwdns2936071:04crwdne2936071:0

      Verwende einen iOpener, um den Klebstoff unterhalb des Akkus zu lösen.

      crwdns2936071:05crwdne2936071:0

      Verbiege oder beschädige den Akku nicht, er könnte sich sonst entzünden.

      crwdns2936071:06crwdne2936071:0

      Setze das flache Ende eines Spudgers in den Spalt an der Oberkante des Akkus ein, und beginne die obere rechte Ecke hochzuhebeln.

      crwdns2936071:07crwdne2936071:0

      Verwende das flache Ende eines Spudgers um den restlichen Klebstoff unterhalb des Akkus zu lösen.

      crwdns2936071:08crwdne2936071:0

      Entferne den Akku aus deinem Huawei Honor 10.

      crwdns2944171:0crwdnd2944171:0crwdnd2944171:0crwdnd2944171:0crwdne2944171:0