crwdns2933423:0crwdne2933423:0

Google Pixel 3 后盖更换

crwdns2931529:0crwdnd2931529:0crwdnd2931529:0crwdnd2931529:010crwdnd2931529:0crwdne2931529:0

crwdns2936315:0crwdne2936315:0
crwdns2936311:0crwdne2936311:0
crwdns2931653:02crwdne2931653:0
Google Pixel 3 Back Cover Replacement, Create a gap in the seam: crwdns2935265:00crwdnd2935265:01crwdnd2935265:03crwdne2935265:0 Google Pixel 3 Back Cover Replacement, Create a gap in the seam: crwdns2935265:00crwdnd2935265:02crwdnd2935265:03crwdne2935265:0 Google Pixel 3 Back Cover Replacement, Create a gap in the seam: crwdns2935265:00crwdnd2935265:03crwdnd2935265:03crwdne2935265:0
Create a gap in the seam
  • Apply a suction cup to the heated bottom edge of the back cover.

  • Make sure you did not mistake the screen side for the back cover side.

  • If your back cover is badly cracked, covering it with a layer of clear packing tape may allow the suction cup to adhere.

  • Lift on the suction cup with strong, steady force to create a gap.

  • Depending on how aged your phone is, this may take significant force. If you are having trouble, apply more heat and try again.

  • Insert an opening pick into the gap.

  • Don't use metal tools to pry, or you'll mar or shatter the glass back cover. If the panel won't budge, apply more heat, either with a hair dryer or heat gun.

在加热后的后盖底部边缘吸附一个吸盘。

确保你把吸盘吸附在后盖上而不是屏幕上。

如果你的后盖玻璃严重破碎,请用一层透明的胶带覆盖它,这么做会让吸盘更容易吸住。

确保吸附牢固后,稳稳提起吸盘。让后盖和机身间出现一个小缝隙。

取决于你的手机的新旧程度,这可能需要很大的力量。如果你有困难,请再次按照上一步骤加热底部并再次尝试。

将撬片插入缝隙中。

+[title] Create a gap in the seam
[* black] Apply a suction cup to the heated bottom edge of the back cover.
[* icon_caution] Make sure you did not mistake the screen side for the back cover side.
[* icon_note] If your back cover is badly cracked, covering it with a layer of clear packing tape may allow the suction cup to adhere.
[* black] Lift on the suction cup with strong, steady force to create a gap.
[* icon_note] Depending on how aged your phone is, this may take significant force. If you are having trouble, apply more heat and try again.
[* black] Insert an opening pick into the gap.
[* icon_caution] Don't use metal tools to pry, or you'll mar or shatter the glass back cover. If the panel won't budge, apply more heat, either with a hair dryer or heat gun.

crwdns2944171:0crwdnd2944171:0crwdnd2944171:0crwdnd2944171:0crwdne2944171:0