crwdns2936637:0crwdne2936637:0 crwdns2853008:0crwdne2853008:0 crwdns2918746:0crwdne2918746:0

Galaxy S9 Plusの液体検出機能の修理

crwdns2935419:0crwdne2935419:0
crwdns2936315:0crwdne2936315:0
crwdns2936323:0crwdne2936323:0
crwdns2931653:02crwdne2931653:0
Galaxy S9 Plus Moisture Detected Fix: crwdns2935265:00crwdnd2935265:01crwdnd2935265:01crwdne2935265:0

  • To fix the issue:

  • 1. Use compressed air (gently) to blow into the connector to remove liquid or loose debris. Alternatively use a straw and blow directly into the connector.

  • 2 . Clean the connector with clean water and paper towel cut in tiny strip. Dispense water gently via drop directly into the connector, and remove them again with paper towel strips

  • 3. Let it dry: leave the connector alone for 6hrs so it can dry out before charging. Using the phone in this time span is ok as long as it's not charged.

  • If charging is needed urgently, use wireless charging (S9+)

  • Be aware that the charge cable connector can be contaminated with salt/ or rust. Therefore it need to be gently cleaned as described above . Else it can transfer to the phone, and cause the issue again. Or cause the issue while connected to the phone.

  • If there is fabric fibers inside the connector, these can be removed with a needle by scraping the bottom of the connector. Use magnification during operation is best.

問題を解決するために：

1.圧縮した空気を使い(優しく)液体やホコリをコネクタから取ってください。代わりにストローを使ってコネクタに直接息を吹きかけてください。

2.コネクタをきれいな水で洗い、ペーパータオルを小さく細長く切ってください。コネクタに水を少し優しくつけ、ペーパータオルでふき取ってください。

3.乾かします：6時間コネクタを乾かします。そうすると充電する前には完全に乾きます。充電していなければ6時間電話を使うことはできます。

万が一充電が必要になった時はワイヤレス充電を使ってください(S9+)

注意していただきたいのは充電ケーブルコネクタは塩やさびで汚れることがあります。したがって上記で説明したように優しくきれいにする必要があります。さもなければ電話に伝わり、問題が再発します。または電話につないでいる間に問題が引き起こされるでしょう。

[* black] To fix the issue:
[* black] 1. Use compressed air (gently) to blow into the connector to remove liquid or loose debris. Alternatively use a straw and blow directly into the connector.
[* black] 2 . Clean the connector with clean water and paper towel cut in tiny strip. Dispense water gently via drop directly into the connector, and remove them again with paper towel strips
[* black] 3. Let it dry: leave the connector alone for 6hrs so it can dry out before charging. Using the phone in this time span is ok as long as it's not charged.
[* black] If charging is needed urgently, use wireless charging (S9+)
[* black] Be aware that the charge cable connector can be contaminated with salt/ or rust. Therefore it need to be gently cleaned as described above . Else it can transfer to the phone, and cause the issue again. Or cause the issue while connected to the phone.
+[* black] If there is fabric fibers inside the connector, these can be removed with a needle by scraping the bottom of the connector. Use magnification during operation is best.

crwdns2944171:0crwdnd2944171:0crwdnd2944171:0crwdnd2944171:0crwdne2944171:0