crwdns2936637:0crwdne2936637:0 crwdns2853008:0crwdne2853008:0 crwdns2918746:0crwdne2918746:0

任天堂Switch的左侧Joy-Con手柄传感滑轨的更换

crwdns2933809:0crwdne2933809:0

crwdns2935433:0crwdne2935433:0

更换任天堂Switch背部外壳

任天堂Switch的Micro SD卡槽的更换

任天堂Switch的屏蔽板的更换

任天堂 Switch 更换电池的准备工作

crwdns2935443:0crwdne2935443:0

= crwdns2915112:0crwdne2915112:0 = crwdns2861241:0crwdne2861241:0
crwdns2936315:0crwdne2936315:0
crwdns2936311:0crwdne2936311:0
    Follow this guide to replace a broken or faulty left Joy Con sensor rail on the Nintendo Switch game console.
    ***The Switch uses JIS screws. A JIS 00 driver works best, but you can also use a JIS 000 driver. If you use a Phillips screwdriver in a pinch. Be very careful not to stripdriver, you'll risk stripping the screws. iFixit's Phillips bits are designed to be cross-compatible with JIS-style screws.***
    ***Note:*** When you remove the shield plate, you’ll need to replace the thermal compound between the plate and the heatsink. Since normal thermal paste isn’t designed to bridge large gaps, the closest replacement is K5 Pro viscous thermal paste.
    ***Note:*** This guide, and the part we sell, are compatible with the original Nintendo Switch model released in 2017, as well as the newer refreshed model released in 2019 (model numbers HAC-001 and HAC-001(-01), respectively).

      crwdns2931349:0crwdne2931349:0

      crwdns2936071:01crwdne2936071:0 — 拆除左侧Joy Con手柄传感器

      用一个拆开工具, 撬棒,或者甚至是指甲翻开Joy Con滑轨数据接线的这个ZIF小锁定片.

      crwdns2936071:02crwdne2936071:0

      用镊子取出接在主板上的手柄数据排线

      crwdns2936071:03crwdne2936071:0

      用手或者镊子移开挡住手柄数据排线的电源接口和配线

      crwdns2936071:04crwdne2936071:0

      用手或者镊子移开电源排线,避免挡住手柄数据排线

      crwdns2936071:05crwdne2936071:0

      用适配JIS 000标号的螺丝刀或者iFixit精修套件中的PH 000螺丝刀取下4颗固定手柄滑轨和外壳的3.7mm螺丝

      crwdns2936071:06crwdne2936071:0

      从设备上拆下左手柄传感滑轨

      crwdns2944171:0crwdnd2944171:0crwdnd2944171:0crwdnd2944171:0crwdne2944171:0