crwdns2933423:0crwdne2933423:0

HomePodの分解

crwdns2936315:0crwdne2936315:0
crwdns2936323:0crwdne2936323:0
crwdns2931653:012crwdne2931653:0
HomePod Teardown: crwdns2935265:00crwdnd2935265:01crwdnd2935265:03crwdne2935265:0 HomePod Teardown: crwdns2935265:00crwdnd2935265:02crwdnd2935265:03crwdne2935265:0 HomePod Teardown: crwdns2935265:00crwdnd2935265:03crwdnd2935265:03crwdne2935265:0
  • After a lot of fruitless goofing around with all manner of heat and twisting, we're stumped as to how to proceed from here. Finally we get impatient and grab the hacksaw (and our ultrasonic cutter) and release the super beefy woofer.

  • Update: An intrepid MacRumors reader had more success here. We tried approximately the same thing with no results, but maybe we should have kept trying! If you must pull one of these apart, give this method a whirl.

  • If the magnet on this woofer looks big for a speaker this size, that's because it is. Deep, dramatic bass notes depend on a speaker's ability to move lots of air.

  • While that's traditionally done by increasing the cone's diameter, Apple instead increased the travel of the voice coil (to 20 mm p-p in this case), which in turn requires a bigger magnet. That way the speaker diameter stays small, but it can still move enough air to deliver quality bass notes.

温めたり捻ったり、成果のあまりでない方法で手探りでやってみましたが、この先に進むことができません。ついに手段が残された私たちは、ついに弓ノコ(と超音波カッター)を用意して、この超強力なウーファーを外すことにしました。

分解アップデート: MacRumorsの読者の方が、この方法でより上手く解体できました。私たちもおおよそ同じ作業を試みましたが、あまり良い結果は出ませんでした。しかし続けてやってみるべきだったかもしれません。どうしても分解しなければならない場合は、この方法を試してみてください。

このスピーカーのサイズに比べてウーファー上のマグネットが大きく見えるなら、実際に大きいということです。ディープで感動的なベース音を可能にするには空気を振動させるスピーカーの性能次第なのです。

これまで振動板(コーン紙)の直径を増やせば音質が向上できるとされてきましたが、Appleは代わりにボイスコイルの振動を増加させました(今回は20 mm p-pまで)。このためスピーカーの直径は小さいものの、空気を十分に振動させることによって高質のベース音を生み出せます。

crwdns2944171:0crwdnd2944171:0crwdnd2944171:0crwdnd2944171:0crwdne2944171:0