crwdns2933423:0crwdne2933423:0

Sostituzione altoparlante inferiore dell'iPhone X

crwdns2931529:0crwdnd2931529:0crwdnd2931529:0crwdnd2931529:017crwdnd2931529:0crwdne2931529:0

crwdns2935425:011crwdne2935425:0

crwdns2936315:0crwdne2936315:0
crwdns2936321:0crwdne2936321:0
crwdns2931653:011crwdne2931653:0
iPhone X Lower Speaker Replacement, Replace the speaker gasket: crwdns2935265:00crwdnd2935265:01crwdnd2935265:03crwdne2935265:0 iPhone X Lower Speaker Replacement, Replace the speaker gasket: crwdns2935265:00crwdnd2935265:02crwdnd2935265:03crwdne2935265:0 iPhone X Lower Speaker Replacement, Replace the speaker gasket: crwdns2935265:00crwdnd2935265:03crwdnd2935265:03crwdne2935265:0
Replace the speaker gasket
  • The speaker's gasket is not reusable. During reassembly, follow this step to replace the gasket.

  • Use tweezers to peel off and remove all the old gasket from the frame and speaker.

  • Use a microfiber cloth and isopropyl alcohol to clean all the gasket's adhesive residue from the frame and speaker.

  • Before installing the speaker gasket, find its proper orientation on the bottom of the speaker—the large cutout on the gasket should go around the speaker grille mesh.

  • Remove the larger, clear liner from the gasket and use tweezers to carefully put the gasket into place on the bottom of the speaker.

  • To avoid touching the exposed adhesive, only grip the gasket by the outer edges of the liner.

  • Use your fingers or a spudger to firmly press the gasket into place to secure it with the adhesive.

  • Remove the remaining liner and put the speaker into place, making sure the speaker connector doesn't get stuck underneath.

La guarnizione dell'altoparlante, una volta rimossa, non è riutilizzabile. Durante il riassemblaggio, segui questi passaggi per sostituirla.

Usa delle pinzette per tirare via la vecchia guarnizione tra la cornice e l'altoparlante e rimuoverla completamente.

Per pulire i residui dell'adesivo della guarnizione dalla cornice e dall'altoparlante, usa un panno in microfibra con dell'alcool isopropilico.

Assicurati che la guarnizione, da inserirsi nel fondo dell'altoparlante, sia correttamente allineata prima di installarla; il foro ampio sulla guarnizione dovrebbe stare attorno alla griglia dell'altoparlante.

Rimuovi il rivestimento trasparente più grande dalla guarnizione e usa una pinzetta per posizionare con cura la guarnizione sul fondo dell'altoparlante.

Fai attenzione a fare presa solo sugli estremi del rivestimento della guarnizione, così da non toccare l'adesivo esposto.

Usa le dita o uno spudger per spingere con decisione la guarnizione in posizione, per bloccarla e farla aderire all'adesivo.

Rimuovi il rivestimento residuo della guarnizione e inserisci l'altoparlante in posizione, assicurandoti che il suo connettore non gli si incastri sotto.

crwdns2944171:0crwdnd2944171:0crwdnd2944171:0crwdnd2944171:0crwdne2944171:0