Electrolux LTE12 - Washing Machine Disassembly

crwdns2936071:01crwdne2936071:0

Unplug the wall outlet.

crwdns2936071:02crwdne2936071:0

Fasten the lid of the washing machine with a large crepe tape. Do not open when removing the top of the machine.

crwdns2936071:03crwdne2936071:0

Open the top of the washer. Lift the back first. And then the front.

crwdns2936071:04crwdne2936071:0

Remove the Phillips screw.

crwdns2936071:05crwdne2936071:0

Remove the two Phillips screws.

crwdns2936071:06crwdne2936071:0

To loosen the Control Panel cover, loosen the two Phillips screws. (Left side).

crwdns2936071:07crwdne2936071:0

To loosen the Control Panel cover, also loosen the two Phillips screws on the right side.

crwdns2936071:08crwdne2936071:0

Carefully lift the cover of the Control Panel. In this photo, the glass cover was removed to enlarge the image.

crwdns2936071:09crwdne2936071:0

If there is a need to replace the Power Circuit Board, carefully pull out the program select button.

crwdns2936071:010crwdne2936071:0

To remove the circuit board from the Panel buttons, remove the three Phillips screws. Disconnect the cable carefully.

crwdns2936071:011crwdne2936071:0

If you need to replace any components on the button circuit board, loosen the three Phillips screws to remove the acrylic shield.

crwdns2936071:012crwdne2936071:0

To change the pressure switch, cut the clamp and remove the

crwdns2936071:013crwdne2936071:0

To assemble the Washing Machine, follow the same procedure, in the reverse order.