crwdns2915892:0crwdne2915892:0
prerequisite
crwdns2942213:0crwdne2942213:0
-
-
Use the tip of a spudger to peel back a small piece of tape covering a screw on the left side of the headphone jack.
-
-
-
Remove the following screws securing the headphone jack, Lightning connector, and speaker.
-
Three 2.6 mm #000 Phillips screws
-
Two 2.0 mm #000 Phillips screws
-
One 1.85 mm #000 Phillips screw
-
-
-
-
Use the flat end of a spudger to pry the speaker up from the rear case.
-
-
-
Grasping the large ribbon cable, gently pull the Lightning connector assembly out of the bottom of the case.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.