crwdns2894164:0crwdne2894164:0

What you need

crwdns2875812:0crwdne2875812:0

  1. iPhone XS Max Back Glass Replacement, Back Glass Separating Without Phone Disassembling: step 1, image 1 of 1
    • Here we have an iPhone XS Max with broken back glass. Run function test first. All going well. Test wireless charging - nothing goes wrong.

  2. iPhone XS Max Back Glass Replacement: step 2, image 1 of 1
    • Next, let’s scan the back glass with the Laser Machine.

    • Turn the phone off and place it upside down under the focus positioning probe. Press the ‘auto focus’ button on the panel.

    • With the focus length indicator on, place the phone upside down on the operating panel.

  3. iPhone XS Max Back Glass Replacement: step 3, image 1 of 1
    • Run the matching program. Choose corresponding model and drawing. Get all parameters set.

    • Click ‘Red Light’ to turn on laser aiming function. Click ‘Mark’ to scan the back glass with the laser light.

    • Note: there will be smog when the laser light is scanning. So we need to switch on the Air Purifier.

  4. iPhone XS Max Back Glass Replacement: step 4, image 1 of 1
    • Once finished, the back glass becomes transparent.

    • Again, let’s turn on the phone and run function test. All going well. Wireless charging also goes well.

  5. iPhone XS Max Back Glass Replacement: step 5, image 1 of 1
    • Next, let’s separate the back glass from the mid-frame. The scanned back glass can be separated easily.

    • Insert the metal pry piece into the gap between the back glass and the mid-frame. Slide back and forth to separate the back glass from the mid-frame.

  6. iPhone XS Max Back Glass Replacement: step 6, image 1 of 1
    • Once the back glass has been separated completely, scan with the laser light to remove residual glue on the mid-frame.

  7. iPhone XS Max Back Glass Replacement: step 7, image 1 of 1
    • Once done, clean the mid-frame thoroughly.

    • Apply some B7000 glue to the mid-frame. Get the new big hole back glass in position and adhere with proper force.

    • Once done, clip the four sides of the phone with clamps and wait several minutes for the glue to dry out.

crwdns2878424:0crwdne2878424:0

crwdns2878426:013crwdne2878426:0

Phryne

crwdns2886885:017/11/2019crwdne2886885:0

18,522 crwdns2915208:0crwdne2915208:0

crwdns2886889:018crwdne2886889:0

crwdns2917036:011crwdne2917036:0

Yeah, like I have a laser machine.

Gregg Stanley - crwdns2853112:0crwdne2853112:0

Thanks for the turorial. Like a laser machine can be found hanging around like a regular tool.

Franklin - crwdns2853112:0crwdne2853112:0

The actual !&&*? Is this a joke? TF is this doing here? Is that machine include with every iPhone?

Admer Bits - crwdns2853112:0crwdne2853112:0

This is the reason, why there is a note at the very top of this tutorial: This guide is meant for repair professionals.

There is a german saying: “Who can read has a huge benefit.” Just kidding … ;-)

BenZ78 - crwdns2853112:0crwdne2853112:0

i want to buy iphone xs max back panel (back glass)

SADAM TURK - crwdns2853112:0crwdne2853112:0

crwdns2917038:0crwdne2917038:0

crwdns2894754:0crwdne2894754:0:

crwdns2894766:024crwdne2894766:0 69

crwdns2894768:07crwdne2894768:0 427

crwdns2894768:030crwdne2894768:0 1,841

crwdns2894770:0crwdne2894770:0 67,274